几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 06:14 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 hurricane wind speeds 93-sec. gust vs sustained0

hurricane wind speeds (3-sec. gust vs sustained)
check out this design implementation and see how florida is designing its enhanced hurricane protection areas (ehpa) by increasing the wind speed to a 1000 year event vs. an importance factor of 1.15 for a 100 year event. if you think your buildings are safe remember to deduct 40mph from your design should you think about riding out the storm. see table g-1
i would like to clarify that the extra 40 mph increase for an ehpa is recommended and not required. i work in florida, and have designed several schools with ehpa's in them. in all cases, the school board did not want to pay the extra costs associated with the extra 40 mph wind speed increase. so we simply designed these areas for the base wind speed, with all the other ehpa design criteria. so don't assume that becuase something is designated an ehpa, that you are any safer than a normal modern building. in fact, during last years hurricanes, many designated shelters lost their roofs, or had other structural or building envelope failures. not ours of course, but others.
did you convert the 2 minute sustain wind to 3 second gust?
after the conversion, can you use the same coeficients (kz, cp, etc.) giving in asce 7 to get your wind pressure?
structural01
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
hurricane basic wind speed huangyhg 产品功能分析 0 2009-09-09 06:13 PM
british wind loading codes huangyhg 产品功能分析 0 2009-09-07 05:19 PM
asce 7 wind speeds 180mph huangyhg 产品功能分析 0 2009-09-07 01:00 PM
another wind load question huangyhg 产品功能分析 0 2009-09-07 12:18 PM
【转帖】asme美国机械工程师标准目录2 huangyhg American standards 5 2009-04-26 02:38 PM


所有的时间均为北京时间。 现在的时间是 09:15 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多