几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-07, 02:07 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 b roof deck vs c floor deck - for floor use

"b" roof deck vs "c" floor deck - for floor use
i've specified "b" deck for roof applications. throughout the years, for floor applications, i've seen b-deck specified on various plans from other engineering firms and have had it requested by contractors, due to in-stock convenience i presume. therefore, not seeing any "red-flags", i also have specified it for floor use, whether with concrete topping or simple 3/4" deck.
after consideration, i wonder why i do not specify "c" deck which is apparently fabricated for floor apps. further investigation shows that the two deck in question are virtually identical with the exception that they are reversed in orientation, such that the section profiles, and thus the sp and sn are exact opposites. with the sp and sn being so negligibly close, (imo), is there any reason to change what i am specifying?

type b deck is intended for roof deck.
type "c" deck - i think you are referring to vulcraft's conform deck which is a utility deck that can also be used as a form-deck for concrete slabs (non-composite).
i've never seen type b deck used for floors and i've never done so. this is not to say you can't...just that i haven't seen it used that way.
deutero:
i would contact vulcraft and ask them. there maybe something that makes type b deck inapporiate for floors. the engineers at vulcraft would know and usually are very happy to explain the sublties of deck and joist engineering.
b deck is ok to use for floors. it is not as commonly used for floors because it is not as efficient or economical as deeper sections. but i have used it on occasion on remodel/retrofit projects to match the existing floors.
just make sure that you use floor deck if you are counting on composite action. the floor deck has mechanical deformations to produce the required bond with the concrete slab while the roof deck may not.
united steel deck used to have a page in their catalog with design information for inverted "b" deck slabs. i believe they were commonly used in the 1980s. it's not in thier current catalog.
i've seen a lot of the inverted b deck in stair landings and wondered why they did it that way. i've always assumed it was just cheaper and more readily available for the small amount needed.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
attachment of roof deck huangyhg 产品功能分析 0 2009-09-07 01:50 PM
assuming metal roof deck rigid diaphragm huangyhg 产品功能分析 0 2009-09-07 01:39 PM
asce figure 6-10 wind loads huangyhg 产品功能分析 0 2009-09-07 01:22 PM
a flat roof huangyhg 产品功能分析 0 2009-09-07 09:05 AM
30 tilt-up and k-series owj roof collapse huangyhg 产品功能分析 0 2009-09-07 08:38 AM


所有的时间均为北京时间。 现在的时间是 02:55 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多