几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-10, 04:52 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 occupancy category iii per ibc 2006, table 1604.5

occupancy category iii per ibc 2006, table 1604.5
ibc states for occupancy category iii that covered structures whose primary occupancy is public assembly with a capacity greater than 300 persons.
base on what the commentary states, if you exceed 300 persons yet the building's primary occupancy is not governed by public assembly (say residential governs) you can fall back to category ii.
now say you have a restaurant and the occupancy load is 2450 while the remaining occupants are condos (residential). the total building load is 4999 (2549 residential at 51%). this makes the primary occupancy residential thus you fall under category ii.
any thoughts?

check out our whitepaper library.
is the separation between the occupancies a fire wall? if so, then each can be considered a separate building and the a-2 would be iii, and the r-2 ii.

don phillips
i would think a firewall is included. where in the code does it specifically say to consider them as separate buildings?
tia

don't you also have a change in the importance factors. i would stay with cat 3
cut the restaurant loose structurally is the only way i can see designing for a lower i.
it a renovation on a multi story building so there no opportunity to separate the structural systems. my gut tells me to stay with category iii as well but i need to prove it in the code and currently the way ibc 2006 has changed this statement i'm struggling to find the exception to the rule. it's interesting how fema 450 retains this statement but asce 7-05 chose not to.

asce 7-05 states "the classification for each independent structural system of a multiple-use building or other structure shall be that of the highest usage group in any part of the building or other structure that is dependent on that basic structural system."
seems pretty clear you have to go with worst case, occupancy category iii.

i like what your saying but how would this govern over ibc section 508 for mixed use occupancy?
705.1 general. each portion of a building separated by one or more fire walls that comply with the provisions of this section shall be considered a separate building. the extent and location of such fire walls shall provide a complete separation. where a fire wall also separates occupancies that are required to be separated by a fire barrier wall, the most restrictive requirements of each separation shall apply.

don phillips
bingo! thank you don for the late night tip and to everyone else.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
ibc shear wall table used for a diahragm huangyhg 产品功能分析 0 2009-09-09 06:54 PM
ibc 2006, asd allowed for foundation safety check huangyhg 产品功能分析 0 2009-09-09 06:45 PM
ibc 06 table 1804.2 bearing capacities allow. or gross huangyhg 产品功能分析 0 2009-09-09 06:36 PM
aci 318 appendix d per 06 ibc 1912.1 huangyhg 产品功能分析 0 2009-09-07 09:41 AM
【转帖】asme美国机械工程师标准目录2 huangyhg American standards 5 2009-04-26 02:38 PM


所有的时间均为北京时间。 现在的时间是 04:51 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多