几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-10, 10:11 AM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 liability insurance

liability insurance
besides my full time job, if i take own my own
small structural design job, and place my pe stamp on it
do i have to have liability insurance on me.
of course it is so costly that i cannot afford it.
so i should not do this. or there are some loop holes.
thanks in advance
sure, the loophole you can use is to give all your worldly possessions including your house, bank accounts, car and furniture to your wife (depending on state law), relatives or friends. that way if you're sued, there's nothing to take.
otherwise, get the insurance. if your fees aren't enough to cover the insurance, then you shouldn't be doing the work.
although some clients require errors & omitions as well as liability insurance, you only need it if you want to keep your house and belongings should you get sued.
there is insurance available where it is obtained on a project to project basis and the cost of the insurance is based on the exposure/value of the job.
you should talk to a lawyer (who will present you with a conservitive approach). i'm not sure if incorporating your side job (such as recentgrad p.e., inc.) would protect you or not, but it would be worth checking out.
a lawyer should be able to help you come up with contract provisions that could limit your liability to the client. there is still third party liability to be concerned about, if a design error causes harm to somebody other than the client.
you need to find out if your company will even allow you to take side jobs. many will not. if you do a side job and get sued your company may be exposed to a suit as well. i don't drive my car without insurance, i wouldn't sign and seal drawings without it either, imo.
in many states, the state engineering rules prohibit moonlighting unless the employer is notified. be sure to check on that. also, many states require a corporate pe license, even to practice as an individual, and you should check on that.
from a practical standpoint, if you're more or less broke anyway, you're not as likely to get sued.
i have a full time job and have been doing side jobs (as ya'll call it) for 10 yrs. my side jobs which makes double my salary. however, i work after work till midnight sometimes + all weekend. the money is good. law suites are there. i have been sued once in 10 yrs. i do not have insurance. the job was a small residential structure for $250.00 and the law suite cost me $20,000.00. in other words, you are taking a chance. i made much much more in 10 yrs than i did being sued. if you are confident, then it should not be a problem.
i have been doing work on the side for about 13 years. the first 4 -5 years i didn't have liability insurance. i finally found the asce liability insurance specifically for part time work. it is high but not unreasonable. my 10 years worth of premiums are less than ashhafpe's $20,000 law suit and i'm covered up to $250,000. i am much more comfortable with the liability insurance. all the things i am doing all the extra work for are protected.
rockengineer, thanks for the info. i will go checkout asce liability. the only concern i have is, you always here that if you have insurance you always double your chances for law suits. people see it as a way for them to make easy money. the city i am in is the number 1 in the nation as far as law suites ranging from foundations, plumbing leaks, mold, ..etc you name it.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
irc masonry chimney liability huangyhg 产品功能分析 0 2009-09-09 09:23 PM
insurance huangyhg 产品功能分析 0 2009-09-09 07:47 PM
enr article on insurance threa huangyhg 产品功能分析 0 2009-09-08 10:33 PM
could engineering houses affect insurance huangyhg 产品功能分析 0 2009-09-08 02:14 PM
ada, osha and code violations huangyhg 产品功能分析 0 2009-09-07 10:09 AM


所有的时间均为北京时间。 现在的时间是 06:46 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多