几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 12:58 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 florida sun room

florida sun room
i need some expert opinions. i have a client that installs sun rooms (aluminum framing, glass windows, composite roof structure). we now have a new building code in effect in florida (the florida building code). previously, these rooms were not treated as "additions" to the home because the room was seperated by an already existing exterior door and was not heated or air conditioned. however, under the new code the "existing building" chapter has become more detailed (no direct mention of the sun rooms) effectively clarifying what was in the previous codes (really no change just clarifications on areas, etc.). my question is do you think sun rooms should be treated the same way as say adding a fourth bedroom? the definition of habitable space is a space in a structure for living, sleeping, eating, or cooking. bathrooms, toilets, closets, screen enclosures, halls, storage and utility facitilities and similar are excluded, but i know you could do all of the above in those areas as well. one last point, the rooms are designed for the current code wind loads, but the code also requires shutters for certain areas. should these sun rooms require shutters since they are seperated by the exterior wall/door?
sorry so long.
check out our whitepaper library.
i think the more convenient way to get a reliable answer is to ask to the authority giving the permits (ask and get their answer in writing); it may turn that the more expensive hypothesis is the one that holds, but at least you will know for sure what you are asked to do and the contractor be able to pass the cost to the purchasers.
the building departments are part of the problem. some are requiring shutters others are not. i just want some engineering opinions on whether or not it seems justified.
re the shutters.....i believe that the shutters are for the purpose of resisting projectiles into the space and to avoid risk to life and limb from glass. if there are windows in your "exterior" wall, you would need shutters on them, at least, if there is a straight line through the two sets of windows.
otherwise....at least in tornado country, when we design for a severe/tornado shelter per fema 361, you would consider the sun porch a "tear-away jersey" and assume it doesn't exist in the event of a hurricane and design the remaining portion of the house as you normally would be required.
adding to jae's comments:
the shutters protect windows from breaking under the impact of a projectile. the florida building code specifies that, unless exterior glazing is impact resistant or protected, the windows shall be considered as openings. openings in the wall could change the classification of the building (or portion of building) from enclosed to partially enclosed, increasing the internal pressure about 300%(cf =0.18 for enclosed buildings, cf = 0.55 for partially enclosed buildings).
dlew and others,
i'm aware of all the requirements for additions under the code. the question is whether or not these sun rooms should be classified as true "additions" or not. in 90% of the cases these are being added to existing homes that don't comply with the current code. i'd like to know if anyone elses codes in other areas addresses these "rooms" specifically in their codes as jae stated for a tornado shelter. thank you.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
engg vs. conventional construction - residences in florida huangyhg 产品功能分析 0 2009-09-08 10:25 PM
appropriate live load for file cabinet storage room huangyhg 产品功能分析 0 2009-09-07 12:36 PM
a question for the florida engineers huangyhg 产品功能分析 0 2009-09-07 09:08 AM
【转帖】room Size yang686526 DirectDWG 0 2009-05-07 03:10 PM


所有的时间均为北京时间。 现在的时间是 04:15 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多