几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-08, 02:25 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 cracks caused by earthquake

cracks caused by earthquake
is it possible that low intensity earthquake can cause only superficial cracks on plasters over concrete? if cracks on concrete appeared after an earthquake, i suppose the structural concrete has been affected thus cracks appeared on plaster. the crack maybe obvious only on the plaster but micro sized cracks may have developed through the structural concrete.
find a job or post a job opening
cracks may have occurred in the concrete, but unless there are shear cracs, i would think you needn't worry about it. concrete is meant to crack and will normally crack under service loads. as long as teh reinforced section has the adequate capacity, there should be no concern (this may be invalid if the steel has yielded, but you would probably see larger cracks depending on the reinforcement ratio).
sometimes, the plaster cracks were existing prior to the earthquake but noticed afterward when the owner starts to look around for damage. if the cracks do not look fresh, that is, have broken off edges, dirt and cobwebs in them, or paint in/briding the cracks, this is evidence of pre-existing cracking. they could be shrinkage cracks on the plaster especially large areas with no expansion joints. just some things to think about.
don phillips
thanks for your responses. the cracks looks fresh and appeared on 2nd floor hallway slab and on soffit of roof deck after a low intensity earthquake.
if your hallway slab is gypcrete, this is non-structural and of no concern other than aesthetic.
if you have a friend who is a structural engineer and can come and take a look, he might be able to assuade your fears, or confirm them.
mike mccann
mccann engineering
please explain the statement "concrete is designed to crack and will normally crack under service load". reinforced concrete is supposed to be firm and solid for us to say that it is structurally sound. concrete structure may still stand inspite of numerous cracks and other defects but theoretically it is not anymore safe to use.
any reinforced concrete
if concrete cracks on the tension area then maybe it is ok as the steel reinf is the one resisting tension. nevertheless, cracks on concrete should not be left un attended and must be repaired to prevent further damage to concrete and steel reinf.
emanc,
if we repaired all cracks in concrete structures, all other structural activity would have to cease for us to catch up. cracks may or may not be cause for concern, and that can really only be determined by structural engineers. you are incorrect in making a blanket statement that "theoretically it is not anymore safe to use".
there is no construction ongoing, my query was about an existing building. my statement was only a personal opinion, if your own house have concrete cracks is it ok with you not to repair it?
my house does have cracks, and there is no need to repair them. as i said before, it depends on the type of cracks. my comment about structural activity ceasing was related to global activity, not your building. suggest you need a structural engineer to assess the cracking and evaluate whether remedial action is required.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
concrete slab cracks huangyhg 产品功能分析 0 2009-09-08 12:40 PM
concrete cracks huangyhg 产品功能分析 0 2009-09-08 11:59 AM
cmu wall cracks huangyhg 产品功能分析 0 2009-09-08 09:39 AM
canadian earthquake design huangyhg 产品功能分析 0 2009-09-07 10:27 PM
bottom cracks on flat slab huangyhg 产品功能分析 0 2009-09-07 04:29 PM


所有的时间均为北京时间。 现在的时间是 10:35 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多