几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-07, 03:43 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 biaxial bending in concrete beams

biaxial bending in concrete beams
can anybody give me some insight on how to handle biaxial bending in concrete beams. the beam doesn't have any axial load...just bending in 2 directions. how do you account for the combined bending. i can't find anything in the aci except for columns with biaxial bending and axial load. any help would be appreciated. thanks
check out our whitepaper library.
neffers,
i would size the top and bottom reinforcing bars of the beam for the vertical moment, and the side rebars for the horizontal moment. i would count the corner bars only as 1/2 bar because one corner rebar may be stressed by both moments.
similarly, i would design the shear ties in such way that they provide the shear reinforcement required by each loading direction. i would use only 70% of the concrete shear strength (vc) to account for the skew direction of the shear force.
this method may not be theoretically exact, but it is simple and, i believe, is conservative.
regards
aef
you must also check concrete stresses in bending.
here you would probably have substantial overlap of the 2 compression zones, so you should add the compressive stresses.
adding to what ribeneke said, wouldn't it be useful if you analize the section considering a rotation in the neutral axis since the bending plane is different to the one we normally use? re
while i may be very very late on this topic. the florida department of transportation has a mathcad program available (free) to download. it computes biaxial moment interaction diagrams for column design. it's good for beams too. just use p =0, and check the moment capacity at the right resultant bending orientation. part of my thesis was on the procedure that this program uses.
and as the previous reader eluded too rotating the n.a. is how the program generates the 3d interaction diagram. from the 3d diagram 2d interaction diagrams are extracted.
also in some older version of aci codes there are short cut methods using combined stress ratios (interaction equations). they are very conservative. using the above program is easier and more economical.
later,
john
ps: if there are any questions i can be emailed a
hi neffers
i am no structural engineer but i wondered, assuming that the loads on the beam were through the neutral axis and at right angles to each other could you not use the principle of superposition ie:- calculate stresses and deflection for
the beam taking each load seperately.
regards
desertfox
if the one moment is considerably smaller than the other, then the approach suggested by delew will give you a workable solution. if the florida dot has a mathcad program, it is likely worth the effort to review it and see how it works. the problem with a more rigorous solution of biaxial bending is that neutral axis and the bending axis are generally different and there is a lot of iteration in obtaining a 'correct' solution.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
beams braced with a welded flat steel plate huangyhg 产品功能分析 0 2009-09-07 03:12 PM
as3600 concrete strength for slab on ground huangyhg 产品功能分析 0 2009-09-07 12:53 PM
analysis of concrete slab huangyhg 产品功能分析 0 2009-09-07 11:35 AM
30mpa parking garage concrete slab vs. 35mpa huangyhg 产品功能分析 0 2009-09-07 08:39 AM
28 day vs. 56 day concrete breaks huangyhg 产品功能分析 0 2009-09-07 08:34 AM


所有的时间均为北京时间。 现在的时间是 08:01 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多