几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-07, 12:44 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 architects vs. engineers

architects vs. engineers
where can i find what an architect is needed for vs.an engineer for each state typically?
check the state architecture and engineering rules for starters. they're generally available online.
contact the state engineering board (or look at the rules/regulations online). they typically outline which structures require professionals to design and which do not require professionals.
i'll throw in my two cents. in the state of florida, the line is nearly impossible to define. i contacted the state board and got back an email response from a lawyer. it was written very lawyer-y - lots of wiggle room. these were the first two sentences of his response: "i have no definitive answer for you. there is no statutory bright line between architects & engineers other than pes cannot call themselves architects when they provide design services." i took his repsonse to mean that if i can show that i had to engineer something in the building and i am competent to do other phases, then i could provide the entire design. i'm not going to take on more than i can handle, but if a client needs plans for a pem or a light commercial building, i've got no problem with taking the job. if i need to sub something out to an se or an ee, i do it.
other states are probably different.
just ask an architect. i'm sure they'll be happy to tell you.
the reason i am asking is i have about 5 years of architectural experience though i got my degree in civil engineering and work as a licensed structural engineer. in addition, i'm am in the process of starting my own business and wondering if i could design buildings completely other than mechanical and electrical which i have no experience with.
you will have to check with your state board and will probably not get a satisfactory answer.
i had a very specific building and question and put it to my board. i am an engineer. the engineer side said "sure". the architect side said "no"
i asked them to call each other - but they wouldn't
apply for architect lic. see what happens.
richard a. cornelius, p.e.
the architects must have a better union (or less self-doubt) because they always seem to be permitted greater latitude in what they can seal.
the ego of an architect makes them think they can do anything. including but not limited to site grading, structural systems, hvac, open heart surgery and head chef at their restaurant. all while charging the client 6-10 percent of the total cost.

no question that aia is a much more influencial organization than asce. i have often wondered why. is it because structural engineers are only a small part of asce?
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
architects dont do buildings like this anymore huangyhg 产品功能分析 0 2009-09-07 12:43 PM
designingengineering directly in cad software huangyhg tec-ease(America) 0 2009-09-04 05:52 PM
【转帖】who creates assembly drawings yang686526 American standards 0 2009-05-04 11:22 AM
【转帖】what should new engineers know yang686526 American standards 0 2009-05-04 11:19 AM
【转帖】decimal dimensioningfractional equivalents yang686526 American standards 0 2009-04-29 07:28 PM


所有的时间均为北京时间。 现在的时间是 08:25 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多