huangyhg

multiple welds symbols from single ref line
i hope i can explain this question w/o a diagram,;
weld symbol pointing to a t-joint calls for fillet welds on one sides of the t and a bevel w/reinforcing fillet on the other, so there is a trianagle above and a bevel symbol w/triangle below the horizontal reference line. no problem here.
off of the first reference line there is a second reference line applying inspection criterias; sometimes the second reference line has "mt" above this second reference line and sometimes there is an "mt" above the second reference line with either a "vt" and/or a "mt" below the second reference line. (mt = mag particle inspection; vt = visual inspection only)
here is my question: which inspection criterias (above or below the second reference line) apply to which weld synbols (below or above the first reference line)?
i hope this question is understandable. thanks for your patience and help.
posting in the eng-tips forums is a member-only feature.
promoting, selling, recruiting and student posting
are not allowed in the forums.
(add stickiness to your site by linking to this professionally managed technical forum)
title: drafting standards,
description: drafting standards, gd&t & tolerance analysis technical support forum and mutual help system for engineering professionals. selling and recruiting forbidden.

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]