几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-16, 10:19 AM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 storefront attachmen

storefront attachment
greetings,
i have a peculiar case which i am trying to analyze and i am lookin for some valuable input.
i have a curtain wall system that attaches to a steel beam. the steel beam has an opening behind it and spans 39'. the opening houses an escalator.
a concrete curb is present to attach the curtain wall. i am trying to use it as a composite section bending about the weak axis, using transformed properties.
please let me know what you think of this.
thanks
anantha
the centroid of your concrete will stay in same vertical position in transformed state, (above the top flange). the weak axis is not strengthened much by adding concrete cap. better to flip w shape on side.
a couple of thoughts...
what is the purpose of this concrete curb? it seems like the connection of the curtain wall to the steel beam will be made more difficult with it present.
in order to control torsion better, plus give more stiffness in the weak direction, why not use a large tube section instead of a wide flange?
mike mccann
mccann engineering
i also would have started with a tube section, some twisting of the section is likely. also note that the concrete is not reinforced for tension for what you are trying to do. it can stand a percentage of tension shared with the wf up to cracking moment only.
the curb (10 wide x 12 deep) is reinforced with 2#7 ea. side. it has studs staggered at 6" o.c.
i just did a similar detail but i used a large tube with the storefront continuous at the outside face. what is the reason for the curb (concrete beam) on top of the wf?
a couple of others:
how do you plan on attaching this at each end, any twisting accounted for? welding the rebar to the columns?
will this composite beam be shored? i assume so, there is no lateral bracing of the wf.
have you checked the concrete beam for shear?
there will be biaxial stress on the section.
the stiffness of the section will change after cracking.
your studs are working for composite gravity loads plus taking the upper wind force into the composite section, need to check this combined.
some more questions....
why are there two steel columns at the escalator opening? is this an expansion joint?
do these column then span multiple floors with a concentrated load from the wind?
are the outer columns concrete?
how is the steel beam attached to those columns?
1. the curb is to add meat. the curb is required by the architect (!!!). the curb is not attached to the column. all the forces are transferred through the beam into the column.
2. steel beam attached to the column using flange plates welded to the embed plate for fixity. also a detail with top and bottom plates welded to the shear tab (creating an i) to attach to the embed plate
3. columns needed for architectural reason. no expansion joint
4. composite beam is unshored. the beam is intended to span 39' in its weak axis with no bracing.
sorry, i guess i'm not understanding this yet....
the sketch appears to show a horizontal beam running between the rectangular columns. but it looks like this horizontal span is interupted by the pair of steel columns. is 39 feet the distance between the rectangular columns?
i agree with others that the concrete curb seems like a waste of money. it looks like you are trying to resist a significant lateral load on a span of 39 feet. perhaps a wide flange with a cap channel top and bottom.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
masonry wall attachmen huangyhg 产品功能分析 0 2009-09-10 12:53 PM
lightgage truss to concrete bearing wall attachmen huangyhg 产品功能分析 0 2009-09-10 10:29 AM
h-pile to pile cap attachmen huangyhg 产品功能分析 0 2009-09-09 03:41 PM
continuous chord angle attachmen huangyhg 产品功能分析 0 2009-09-08 01:36 PM
beam continuous bracing by grating attachmen huangyhg 产品功能分析 0 2009-09-07 02:49 PM


所有的时间均为北京时间。 现在的时间是 04:25 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多