几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   精密机械 (http://www.dimcax.com/hust/forumdisplay.php?f=179)
-   -   c.g. shift on freighter aircraf (http://www.dimcax.com/hust/showthread.php?t=20478)

huangyhg 2009-09-05 10:26 PM

c.g. shift on freighter aircraf
 
c.g. shift on freighter aircraft
hi all
i am working on a freighter floor and have to account for c.g. shift of the contents of the contains. do i use 5%, 10% or other. also, do i have to account for adjacent containers shifting in different directions. is there and certificating authority guidance on this.
any information would be appreciated.
thanks
cs
find a job or post a job opening
there are no regulations relating to this that i know of. you need to be conservative and take into account the potential for shifting. this depends a lot on the design of the restriant systems and the loading instructions. i am aware of an faa rule of thumb being 5%. at the end of the day you have to justify your choice.
nigel waterhouse b eng (hon's)
can-am aerospace,llc, canadian aircraft certification centre


所有的时间均为北京时间。 现在的时间是 10:27 PM.