Standard Store - National Standards



  1. ASME B30.9-2006 Slings - (79.00)
  2. ASME B30.21-2005 Manually Lever Operated Hoists - (60.00)
  3. ASME B30.2-2005 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) - (58.00)
  4. ASME B30.18-2004 Stacker Cranes (Top or Under Running Bridge, Multiple Girder with Top or Under Running Trolley Hoist) - (45.00)
  5. ANSI/ASME B30.17-2006 Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist) - (59.00)
  6. ASME B30.16-2007 Overhead Hoists (Underhung) - (59.00)
  7. ASME B30.11-2004 Monorails and Underhung Cranes - (65.00)
  8. ASME B30.10-2009 Hooks - (58.00)
  9. ASME Y14.2-2008 Line Conventions and Lettering - (47.00)
  10. ASME Y14.1-2005 Decimal Inch Drawing Sheet Size and Format - (44.00)
  11. ANSI/ASME Y14.41-2003 Product Definition Data Set Practices - Digital - (95.00)
  12. ASME B31.8 - 2007 Gas Transmission and Distribution Piping Systems - (185.00)
  13. ASME B31.4 - 2006 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids - (139.00)
  14. ASME B31.1b-2009 Addenda to ASME B31.1-2007 Power Piping - (40.00)
  15. ASME B31.1A-2008 Addenda to ASME B31.1-2007 Power Piping - (40.00)
  16. ASME B30.20-2006 BELOW THE HOOK LIFTING DEVICES - (62.00)
  17. ASME BTH-1-2008 Design of Below-the-Hook Lifting Devices - (53.00)
  18. Y14.5.1M-1994 Mathematical Definition of Dimensioning and Tolerancing Principles - (55.00)
  19. ASME B31.3-2008 PROCESS PIPING - (320.00)
  20. ASME Y14.5-2009 Dimensioning and Tolerancing - (169.00)
  21. ISO 5436-2:2001 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards - (86.00)
  22. ISO 5436-1:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures - (80.00)
  23. ISO/TS 12181-2:2003 Geometrical Product Specifications (GPS) -- Roundness -- Part 2: Specification operators - (65.00)
  24. ISO/TS 12181-1:2003 Geometrical Product Specifications (GPS) -- Roundness -- Part 1: Vocabulary and parameters of roundness - (73.00)
  25. ISO/TS 15530-3:2004 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards - (86.00)
  26. ISO/TR 5460:1985 Technical drawings -- Geometrical tolerancing -- Tolerancing of form, orientation, location and run-out -- Verification principles and methods -- Guidelines - (180.00)
  27. ISO 14978:2006 Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment - (135.00)
  28. ISO/TR 16015:2003 Geometrical product specifications (GPS) -- Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences - (135.00)
  29. ISO/TS 12180-2:2003 Geometrical Product Specifications (GPS) -- Cylindricity -- Part 2: Specification operators - (73.00)
  30. ISO/TS 12180-1:2003 Geometrical Product Specifications (GPS) -- Cylindricity -- Part 1: Vocabulary and parameters of cylindrical form - (92.00)
  31. ISO 1101:2004 Geometrical Product Specifications - (157.00)

Standard Store