几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » Norm Space: Product Automatic Standards - 范数空间:产品自动化标准 » National Standards » American standards
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2007-06-17, 01:21 PM   #1
yogy
高级会员
 
注册日期: 06-11
帖子: 1527
精华: 15
现金: 6353 标准币
资产: 6353 标准币
yogy 向着好的方向发展
默认 区别:倾斜度公差——位置度公差(Angularity Does Not Locate - Use Position Tolerance)

区别:倾斜度公差——位置度公差(Angularity Does Not Locate - Use Position Tolerance)
http://www.dimcax.com/gdt_web/march-07.htm

倾斜度不能定位——优先选用位置度
Angularity Does Not Locate - Use Position Tolerance
如下图所示,为了保证槽中心平面与基准B一致,10mm的方槽应优先选用给出位置度公差要求。若只给出倾斜度公差要求,倾斜度只能控制60度的角度,而对槽中心平面与基准B一致没有限制。若为了更好地控制槽的角度,可在给出位置度公差的基础上,还可给出倾斜度公差要求。须牢记一点的是,对特征而言,定位是首先考虑的因素,定向是其次考虑的因素。

Here is another case where angularity cannot fully define the feature. The original drawing had angularity rather than position applied to the 10mm wide slot. The drawing shows that the center of the slot should be in line with datum axis B. Angularity would assure that the slot is at the 60° basic angle but ignore that the slot center plane should pass through the datum axis. To keep the slot in line with the datum axis, position needs to be applied to the slots size dimension. If the angle of the slot needs to be controlled better than the angularity provided by the position tolerance, an angularity tolerance may be added as a refinement. As we teach in our GD&T seminars, for features of size, locate first with position and refine with orientation, in this case angularity, only if necessary.





此帖于 2007-06-17 01:34 PM 被 yogy 编辑.
yogy离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
旧 2007-06-17, 01:28 PM   #2
yogy
高级会员
 
注册日期: 06-11
帖子: 1527
精华: 15
现金: 6353 标准币
资产: 6353 标准币
yogy 向着好的方向发展
默认 回复: 区别:倾斜度公差——位置度公差(Angularity Does Not Locate - Use Position Tolerance)

英文讲解动画视频参见
http://www.dimcax.com/gdt_web/march-07_files/march_07.wmv
英文讲解内容见上原帖内容。

此帖于 2007-06-17 01:41 PM 被 yogy 编辑.
yogy离线中   回复时引用此帖
旧 2008-03-04, 08:35 AM   #3
simonzeng
初级会员
 
注册日期: 08-03
帖子: 4
精华: 0
现金: 8 标准币
资产: 8 标准币
simonzeng 向着好的方向发展
默认 回复: 区别:倾斜度公差——位置度公差(Angularity Does Not Locate - Use Position Tolerance)

谢谢!
simonzeng离线中   回复时引用此帖
旧 2008-03-04, 08:35 AM   #4
simonzeng
初级会员
 
注册日期: 08-03
帖子: 4
精华: 0
现金: 8 标准币
资产: 8 标准币
simonzeng 向着好的方向发展
默认 回复: 区别:倾斜度公差——位置度公差(Angularity Does Not Locate - Use Position Tolerance)

Thanks!!
simonzeng离线中   回复时引用此帖
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
区别:倾斜度公差——面轮廓度 (Angularity Does Not Locate - Use Profile of a Surface ) yogy American standards 1 2007-06-16 10:12 PM
How to move the position of SW Part model with GDT indication? yogy SolidWorks二次开发 3 2007-05-20 09:40 AM


所有的时间均为北京时间。 现在的时间是 09:48 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多