几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » Norm Space: Product Automatic Standards - 范数空间:产品自动化标准 » National Standards » American standards
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2007-06-24, 03:01 PM   #1
yogy
高级会员
 
注册日期: 06-11
帖子: 1527
精华: 15
现金: 6353 标准币
资产: 6353 标准币
yogy 向着好的方向发展
默认 参考基准须标全(Datum Features Must Be Referenced to Be Used.)

参考基准须标全。


Datum Features Must Be Referenced to Be Used.
如图所示,孔的位置公差给出了基准A和B的要求, 而无相对于基准C的要求。


孔只须满足垂直于基准A,距离基准轴线B为20mm的两个要求。则孔的位置不能唯一确定,孔的两种可能位置如右图所示。为了给定孔的位置,还须给出相对于基准C的要求。



There continues to be the misconception that if a feature is labeled as a datum feature, its use is somehow implied. Take the drawing shown. The position tolerance on the hole references datum features A and B but not C. Therefore the hole must be perpendicular to the plane established by datum feature A and 20 mm from the axis established by datum feature B. Datum feature C has nothing to do with the position of the hole. Yes, the hole is shown on a centerline that is perpendicular to datum feature C. So, we know what the goal is. But, since datum feature C was not referenced in the position tolerance, there is no limit to how far the hole can be off the 90° angle. A couple of possible, acceptable parts are shown.




In order to avoid this, all you have to do is add datum feature C to the position tolerance.


此帖于 2007-12-04 10:47 AM 被 huangyhg 编辑.
yogy离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
旧 2007-06-24, 03:06 PM   #2
yogy
高级会员
 
注册日期: 06-11
帖子: 1527
精华: 15
现金: 6353 标准币
资产: 6353 标准币
yogy 向着好的方向发展
默认 回复: 参考基准须标全(Datum Features Must Be Referenced to Be Used.)

yogy离线中   回复时引用此帖
旧 2009-06-27, 07:06 PM   #3
wjf6300
初级会员
 
注册日期: 09-06
帖子: 11
精华: 0
现金: 137 标准币
资产: 137 标准币
wjf6300 向着好的方向发展
默认 回复: 参考基准须标全(Datum Features Must Be Referenced to Be Used.)

非常地感谢,看完这个,我懂了不少!
wjf6300离线中   回复时引用此帖
旧 2009-10-15, 11:11 PM   #4
050430204
初级会员
 
注册日期: 09-10
帖子: 1
精华: 0
现金: 23 标准币
资产: 23 标准币
050430204 向着好的方向发展
默认 回复: 参考基准须标全(Datum Features Must Be Referenced to Be Used.)

不错
050430204离线中   回复时引用此帖
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭



所有的时间均为北京时间。 现在的时间是 08:01 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多