几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-15, 06:44 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 retention wall slab settlemen

retention wall & slab settlement
we have a rentention wall slab that is 65' long, 7 ' tall with an attached, supported poured concrete slab. the slab area is a pool deck with the pool being 25' from the retention wall. approximately 6' of the rentention wall has settled about 2" on just one side. the supported slab that is attached to that portion of the rentention wall settled recently about 1" down, on the inside area,(away from the wall) where the slabs come together to form an overflow drain line for the pool. it is the only area that has settled. the retention wall also has 5 - 2" drain holes, drilled out several years ago, for some unknown reason, 2 of the drain holes that are inline with the slab that has settled, have been recently letting the sand/backfill drain out of them at an increasing amount. i suspect a major shift in the back fill under that portion of the slab(s) however most of the other suggestions say it was just a small wash out and that the slab can be fixed without any major work. i would like some comments or suggestions on this.thanks larry
were not because you talk of the drain holes showing action precisely where the problem is, i would have thought of inspecting the pool for leaks (measuring loss of level etc). however, it seems is coming from above and washing the ground for both the drain holes and the fact of there being settlement indicate loss of material. is there any important or stable source of water above, such rains, excessive watering, or must be looking for sewage failures etc?

it is impossible to give an informed opinion about something like this when the problem is just expressed in words. some visual information is required.
hokie66, i am working on getting a picture that shows this, thanks for the suggestion.
ishvaaag, we did look at all water issues, and suspect rain water, however we never thought of the sewer, that would be worth checking will let you know.
we tried a garden hose, there was not enough water to show us anything though.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
masonry wall on slab on grad huangyhg 产品功能分析 0 2009-09-10 12:57 PM
in enercalc masonry wall design, what is parapet heigh huangyhg 产品功能分析 0 2009-09-09 07:17 PM
foundation wall tied to s.o.g huangyhg 产品功能分析 0 2009-09-09 01:39 PM
foundation wall 40 feet below grade huangyhg 产品功能分析 0 2009-09-09 01:38 PM
effects of a load on sog and below grade huangyhg 产品功能分析 0 2009-09-08 09:45 PM


所有的时间均为北京时间。 现在的时间是 01:22 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多