huangyhg

integrity of water soaked wood structure
wood members can get wet and still be useable but what level of soaking (and some drying) is reasonable? this is particularly relevant in the wake of hurricane charley.
brunelwannabe,
first of all, that's an interesting handle. are you an afficionado of engineering history?
in response to your question, when lumber is used in a wet state, the allowable stresses are slightly less per the nds (table 4.2 in nds), which means that if the lumber is not heavily loaded at the time it becomes saturated, it may be no big deal.
when the lumber dries, the allowable stress is generally back to the original, unless it had become damaged while wet. but the wood may suffer some distortion due to the wetting and drying process, so be prepared.
epr has a good post. but be carefull of osb sheathing strength loss from flooding. damage due to differential swelling can reduce the sheathing strength.
this is the link to the plywood association, who should be quite familiar with your problem.

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]