几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 02:55 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 grade beam 9v-zone0 question

grade beam (v-zone) question
i have a question regarding the location of a reinforced concrete grade beam. is there any fema or building code that specifies that the top of the grade beams must be at natural grade level? the reason i am asking is that we have designed a stilt home in a v-zone that the county is demanding that the top of the grade beams be a grade level. we currently have them at -12".
i have never run across this before as a problem. they state that fema technical bulletin 5-93 requires that all grade beams are at grade level.
thanks in advance.
there is a section in the publication you are referring to, but i do not read the intent the same as that of the county here. look at page 6 of the publication under "grade beams".
the general intent of the publication is to prevent constructing any obstructions to floodwater flow which would raise the level of the flood. that being said, as long as the top of the grade does not rise above the natural grade of the site, it is ok, provided that the grade beam has been designed to resist the effects of erosion and scour, which will occur with a flood, exposing the grade beam.
the fact is that the lower the grade beam, the less susceptible it is to scour. you are correct and the county is wrong here. print out the publication, and include the paragraph with an explanation in your letter to them. their requirement will make the structure more susceptible to the effects of the flood.
good luck.
mike mccann
mmc engineering
thanks for the reply.
that is exactly my explaination in an email response to the head building official. there response is that this is there intrepretation and that is what i must do. i also discussed the fact i would be running into a problem with the elavator shaft if i raised all of my grade beams.
they even told me that if i was going to run into problems with the elevator to redesign my entire foundation using a different method. needless to say we had an interchange of words. either way, i have an appointment to meet with them on this issue on wednesday. is there any other method of going about this? if not, i do not think they are going to budge.
thanks
andrew
have you called fema and talked to one of their engineers for their reaction?
i would refuse to do what they want for safety reasons, and state so in writing. i would get their reaction in writing so the owner can sue the jurisdiction when his building washes away during the next flood. ask thm how much liability insurance they have. the cotrps of engineers does have jurisdiction in flood control areas too. talk to them too.
mike mccann
mmc engineering
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
cross beam bolted connection huangyhg 产品功能分析 0 2009-09-08 03:55 PM
concrete grade beam huangyhg 产品功能分析 0 2009-09-08 12:13 PM
beam strengthening huangyhg 产品功能分析 0 2009-09-07 03:04 PM
3d correct modeling huangyhg 产品功能分析 0 2009-09-07 08:41 AM
12 x 6.5x 38 thick x 41 residential basement i-beam con huangyhg 产品功能分析 0 2009-09-06 10:30 PM


所有的时间均为北京时间。 现在的时间是 07:25 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多