几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-16, 07:24 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 web crippling of a w-beam encased in concrete

web crippling of a w-beam encased in concrete ??
if a wide flanged beam is encased in concrete (no mesh so i cant consider it composite), do i need to check for web crippling, and web yielding for the concentrated load on the beam?
is there any reference out there that covers this??
thanks
check out our whitepaper library.
i'm not aware of any reference...i would probably not consider the concrete as resisting web crippling or providing any other help if:
1. the concrete is simply unreinforced, cast fire proofing for the beam, or
2. the concrete might be removed someday for whatever reason, or
3. the beam and concrete is in any way exposed to potential moisture infiltration where rusting and spalling of the concrete might occur (i've seen this happen in buildings a lot).
i all of these cases, the concrete may not be considered structural by some future engineer or owner and the concrete removal would create a loss of capacity and safety without anyone (except for you) knowing it.
if the concrete is cast-in, integral with a slab, and reinforced, then perhaps you could then consider its benefits in regards to web crippling, ltb, etc.
thanks jae,
thats a good answer. this is an existing building and we have removed concrete from steel beams in other areas to investigate the existing conditions. i wouldn't like to rely on this concrete only to have someone else in 50 years remove it to investigate this connection.
thanks
t
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
question regarding floor support beam installation huangyhg 产品功能分析 0 2009-09-15 03:58 PM
new to existing concrete beam connection huangyhg 产品功能分析 0 2009-09-10 04:22 PM
concrete edge beams huangyhg 产品功能分析 0 2009-09-08 12:02 PM
chapter 4 preliminary design properties of concrete huangyhg 产品功能分析 0 2009-09-07 11:23 PM
12 x 6.5x 38 thick x 41 residential basement i-beam con huangyhg 产品功能分析 0 2009-09-06 10:30 PM


所有的时间均为北京时间。 现在的时间是 03:54 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多