几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 05:02 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 horizontal moment for vertical cantilever

horizontal moment for vertical cantilever
can anyone recommed a book or design guide to calculate by hand the horizontal moment and shear induced at the corners or a rectangular concrete tank with walls designed as vertical cantilevers?
i have "reinforced concrete reservoirs and tanks" by g.p manning with a graph of the shear and moment at the corners of a vertical cantilever wall but no explanation as to how the values were calculated.
thanks in advance.
re
thanks.
i was thinking about doing that, but the frame analysis did not seem to apply because the wall is bending vertically and horizontally where a 2-d frame is one directional
i don't believe there is a formulation published. atleast, i haven't come across one. portland cement associations's rectangular concrete tanks has tables with coefficients. the coefficients are based on finite element analysis of tanks.
i also have the pca book, but the coefficients don't apply due to the size of the tank. i read an older thread that said design as vertical cantilever and use max horizontal coefficients.
i was just looking for a method to calculate the reqd. horizontal steel.
use any monograph for plate analysis with 3 sides fixed.
(check bureau of reclamation publications)
"roark's formulas for stress and strain" by young & budynos.
if you have an open top reservoir (no roof), and want to design by hand cal. i would analyze and design the wall as fixed at bottom, and pinned on top (on an imiginary beam) with full loads. then perform moment distribution for the imiginary beam, and design an embed beam to take its share.
thanks again for all of the responses.
i am going to try kslee1000's suggestion. the wall is 212 ft long by 25 ft tall, so the plate formulas do not apply. that is why i want to design as a vertical cantilever, but did not know how to calculate the induced moment and shear at the corners due to the restrained effect.
for such long wall, you may need to add intermediate supports, otherwise, the embed beam approach may not be practical (watchout - deflection could be huge).
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
design of moment connections huangyhg 产品功能分析 0 2009-09-08 05:43 PM
cantilever steel beam at column huangyhg 产品功能分析 0 2009-09-07 10:40 PM
calc. reactions for propped cantilever huangyhg 产品功能分析 0 2009-09-07 06:10 PM
beams shear splices vs. moment splices huangyhg 产品功能分析 0 2009-09-07 03:13 PM
aisc 13th ed. and cjp dw moment connections huangyhg 产品功能分析 0 2009-09-07 10:27 AM


所有的时间均为北京时间。 现在的时间是 05:14 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多