几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-07, 12:57 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 asce 7 maps

asce 7 maps
i'm a new engineer and just started my first job
i have been asked to design shearwalls for single family houses and use asce to obtain loads. i design in a few states and obtaining wind speeds via asce7-05 maps is tedious (blury and small) each time i need to determine the wind speed in a certain location.
there has got to be a better way to get this information. anyone know if there is software to get the wind speeds based off of asce7-05?
there was a post a while back with a calculator, but it wasn't exactly a finished product. it was also zip-code based, which has some limitations.
something else to watch for is that some of the wind speeds are defined by local ordinance instead of the maps. for example, i re
just call the local building department where the site is. that works for snow loads too.
old ca se
here are good links for wind & seismic:
wind:
wow, i just posted the question and these responses are great! thanks
arlord,
those links were very helpful.
i'm not sure if that's the same link, but check the 85 mph areas of the map versus the wind calculator. that was one thing the calculator wasn't doing right, as it would show 90 mph in the 85 mph areas.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
asce 7 - what is the definition of area huangyhg 产品功能分析 0 2009-09-07 12:55 PM
asce 7 - impact loading for bulkheads huangyhg 产品功能分析 0 2009-09-07 12:55 PM
asce 37-02 construction wind loads huangyhg 产品功能分析 0 2009-09-07 12:55 PM
asce 17-96 para. 4.2.5 load combinations seiasce 7-02 com huangyhg 产品功能分析 0 2009-09-07 12:54 PM
are asce 7-02 wind loads ultimate or service level huangyhg 产品功能分析 0 2009-09-07 12:46 PM


所有的时间均为北京时间。 现在的时间是 05:05 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多