yang686526

老才，如果会编就编一个让大家欣赏一下你的才能！
www.dimcax.com
老才，如果会编就编一个让大家欣赏一下你的才能！
图形随鼠标移动的程序编写，用c#
已经有一个块名为mybtr，块内已经添加了如线、圆等实体。我想实现这样的功能，当鼠标在autocad
用动态块吧
用动态块，然后用i插入即可。
还用老才亲自出马？我来告诉你
<commandmethod("mm")> _
public sub movetermline()
try
objarraylist.clear()
dim caddoc as acaddocument = cadmgr.joincad_doc
if caddoc.readonly = true then
caddoc.sendcommand("此文件为只读文件，不能执行此操作")
exit sub
end if
dim ptresult as promptpointresult = cadmgr.getpt()
if ptresult is nothing then
exit sub
end if
dim pt1(0 to 2) as double
pt1(0) = ptresult.value.x : pt1(1) = ptresult.value.y : pt1(2) = ptresult.value.z
dim otherpt as object = cadmgr.getbotherpt(pt1)
if otherpt is nothing then
exit sub
end if
dim sset as acadselectionset
try
sset = caddoc.selectionsets.add("movedwg")
catch
sset = caddoc.selectionsets.item("movedwg")
sset.delete()
sset = caddoc.selectionsets.add("movedwg")
end try
dim mode as acselect = acselect.acselectionsetcrossing
sset.select(mode, pt1, otherpt)
for each ent in sset
objarraylist.add(ent)
ent.highlight(true)
next
moveterml()
catch ex as system.exception
utility.showerrormessage("移动失败")
end try
end sub
'移动端子排
dim withevents ed as editor
dim objarraylist as new arraylist
dim ent as object
dim ptstar1(0 to 2) as double
public sub moveterml()
dim ptresult as promptpointresult = cadmgr.getpt()
if ptresult is nothing then
for each ent in objarraylist
ent.highlight(false)
next
exit sub
end if
ptstar1(0) = ptresult.value.x : ptstar1(1) = ptresult.value.y : ptstar1(2) = ptresult.value.z
ed = autodesk.autocad.applicationservices.application.documentmanager.mdiactivedocument.editor
dim db as database = hostapplicationservices.workingdatabase
dim m_ppo as promptpointoptions = new promptpointoptions("\n请选择移动的坐标")
autodesk.autocad.applicationservices.application.updatescreen()
dim m_ppr as promptpointresult = ed.getpoint(m_ppo)
for each ent in objarraylist
ent.highlight(false)
next
ed = nothing
end sub
private sub ed_pointfilter(byval sender as object, byval e as autodesk.autocad.editorinput.pointfiltereventargs) handles ed.pointfilter
dim dypoint as autodesk.autocad.geometry.point3d = e.context.computedpoint '//转换动态点
dim pt(0 to 2) as double
pt(0) = dypoint.x
pt(1) = dypoint.y
pt(2) = dypoint.z
for each ent in objarraylist
ent.move(ptstar1, pt)
ent.highlight(true)
next
ptstar1 = pt
end sub
还有cadmgr模块下面的三个方法，补上
''' <summary>
''' 请选择一个点
''' </summary>
public function getpt() as promptpointresult
dim prpointoptions as promptpointoptions = new promptpointoptions("请选择一个点")
dim prpointres as promptpointresult
dim ed as editor = autodesk.autocad.applicationservices.application.documentmanager.mdiactivedocument.editor
try
prpointres = ed.getpoint(prpointoptions)
getpt = prpointres
if prpointres.status <> promptstatus.ok then
return nothing
end if
catch
return nothing
end try
end function
''' <summary>
''' 画一条直线，并返加未点的坐标
''' </summary>
''' <param name="ptinsert">直线的第一点</param>
public function getotherpt(byval ptinsert as object) as object
try
joincad()
getotherpt = acaddoc.utility.getpoint(ptinsert, "请输入另一点: ")
catch
getotherpt = nothing
end try
end function
public function joincad_doc() as acaddocument
' 连接至 autocad 应用程序
try
' 可能导致异常的代码
acadapp = getobject(, "autocad.application.17")
'if acadapp.visible = false then
' acadapp.quit()
'end if
catch
' 当异常发生时处理异常的代码
try
acadapp = createobject("autocad.application.17")
catch
utility.showwarningmessage(err.description)
joincad_doc = nothing
exit function
end try
finally
' 清理现场
end try
' 连接至 autocad 图形
acaddoc = acadapp.activedocument
joincad_doc = acaddoc
end function
上面的getotherpt应为下面这个方法,传错了
''' <summary>
''' 画一矩形，并返加未点的坐标
''' </summary>
''' <param name="ptinsert">矩形的第一点</param>
public function getbotherpt(byval ptinsert as object) as object
try

getbotherpt = acaddoc.utility.getcorner(ptinsert, "请输入另一点：")
catch
getbotherpt = nothing
end try
end function
看来顶一下真有用
看来顶一下真有用！马上就有人出手了。
这个问题我已经解决了
这个问题我已经解决了，用entityjig实现的，就不必老才了，他也不一定会。
也不必向houlinbo那么麻烦
原帖由 tbeahgl 于
这个问题我已经解决了，用entityjig实现的，就不必老才了，他也不一定会。
jig的东西是不太熟悉
c#最适合开发autocad，因为它拥有vb容易的特点，却具有vc++的强大功能。
插入一个块
public class blockoperatorjig : drawjig
{
#region private member fields
private point3d previouscursorposition;
private point3d currentcursorposition;
private blockreference entitytodrag;
#endregion

[commandmethod("insertblock")]
public void insertblock()
{
//initialize cursor position
//use the geometry library to create a new 3d point object
editor ed = application.documentmanager.mdiactivedocument.editor;
promptresult pr = ed.getstring("输入插入块名称");
if (pr.status == promptstatus.ok)
{
previouscursorposition = new point3d (0,0,0);
autodesk.autocad.databaseservices.database db = application.documentmanager.mdiactivedocument.database;
autodesk.autocad.databaseservices.transactionmanager tm = db.transactionmanager;
using (transaction ts = tm.starttransaction())
{
blocktable bt = (blocktable)tm.getobject(db.blocktableid,openmode.forread);
if (bt.has(pr.stringresult))
{
objectid id = bt[pr.stringresult];
//blocktodrag = (blocktablerecord)ts.getobject(id, openmode.forwrite);

entitytodrag = new blockreference(new point3d(0, 0, 0), id);
ed.drag(this);
entitytodrag.position = currentcursorposition;
blocktablerecord btr = (blocktablerecord)tm.getobject(bt[blocktablerecord.modelspace], openmode.forwrite, false);
btr.appendentity((entity)entitytodrag);
tm.addnewlycreateddbobject((entity)entitytodrag, true);
ts.commit();
}
}
}
} //you must override this method
protected override samplerstatus sampler(jigprompts prompts)
{
//get the current cursor position
promptpointresult userfeedback = prompts.acquirepoint();
currentcursorposition = userfeedback.value;
if (cursorhasmoved())
{
//get the vector of the move
vector3d displacementvector = previouscursorposition.getvectorto(currentcursorposition);
//transform the circle to the new location
entitytodrag.transformby(matrix3d.displacement(displacementvector));
//save the cursor position
previouscursorposition = currentcursorposition;
return samplerstatus.ok;
}
else
{
return samplerstatus.nochange;
}
}
//you must override this method
protected override bool worlddraw(autodesk.autocad.graphicsinterface.worlddraw draw)
{
draw.geometry.draw(entitytodrag);
return true;
}
private bool cursorhasmoved()
{
return !(currentcursorposition == previouscursorposition);
}
}


1