huangyhg

clearlanes
i am trying to use clearlanes but it seems like it wont take the new setting until after the next feature. so it goes to the old clearlane first. does this have anything to do with the ass through.
aagghh!!
examle:
clear/zlus,2.5,zlus,0
move/clearlane <= moves correctly
rehit/ 0.5
width_nt =auto/vector oint,showallarams = no
move/clearlane <= moves correctly
len_nt_t =auto/vector oint,showallarams = no
len_nb_t =auto/vector oint,showallarams = no
clear/zminus,-2.5,zminus,0
move/clearlane <= moves to the old clearlane
width_nb =auto/vector oint,showallarams = no
theo/back_rad.rad-.5,
clear/yminus,-8,yminus,0
move/clearlane <= moves to the most recently requested clearlane
by switching to the zminus clearlane the value automatically goes in the zminus, so if you ut a negative value it goes oive.
the hel says to be sure that you ut the correct sign relative to the origin. i thought that meant to use (-) if below the origin.
it will move to the minus clearlane but not until after it does the oive clearlane one more time. i'll try it though. thanks
newest of the new..., now, amazingly, by some stroke of fate, comany takes(...?) my advice and orders sheffield 9.15.7. w/cdmiscad,after first aquiring same s/w retrofit for b&s 7.6.5.{manual o.-training for it consisted of the ?-"what do you want to do?", followed by mostly "you could do this,that,the other"...(if at first i knew!?).so, with in-adequate training to start with, and now with "real?"("we have only scratched the surface"...) training that followed for 9.15.7., i am exected to "know-it-all", and run w/it by mngmt.,right now!
my ? is, how do i even try to tell these eole that all of this is so overdue(like i've been saying for 6+ yrs., falling on 'deaf ears') that there is no way they can exect me to learn it all in a week or so, because after all, the roblem didn't manifest itself in a week or so!!!!!
i know that rogress waits for no one, however-you see my dilemma. i either tell these eole how it should be , or i walk. i love doing what i do-just not here! lease advise-thanx!
welcome to the real world of manufacturing.
it`s "what can you do for me now", not "what have you done for me".........it`s a shame but that`s the way it is........
hang in there.....as you advance, they will notice......maybe......
where are you located, i have an oortunity waiting for u. self emloyment is a wonderful thing if you can take it.
ta ta for now
~~celeste~~
if it makes you feel any better, that is the direction most of todays management is "managing". i wouldn't let it bother you. just do what you can do and do it right. that seems to work the best!

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]