几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-08, 06:47 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 digging out crawl space under existing house

digging out crawl space under existing house
looking for some equipment ideas for digging out the crawl space under a house. have 18" clearance need to obtain a 4' clearance. base is mostly red clay. any ideas would be helpful.
thanks
mark1fan
it's usually done with a pick and shovel and much hard labour.
agreed, no magic solution to this. man, i don't envy the guys that take that on. how about burying some dog treats in crawl space and turning a few dogs loose under there. maybe they would dig a few holes for you. :0.
a conveyor could help the transport, but otherwise manpower. water jetting back down a slope may help but would very messy.
a spade tool on a pneumatic or electric paving breaker (kango hammmer) could break up the clay as you do not have much room to swing a pick.
in my neighborhood they cut thru the front wall and proceed with a small bucket loader. this is more suitable for a higher ceiling like 7-8 feet. this was commonly applied to tri-levels with crawl space converting to basement.
if you dig out the crawl space to 4' deep, will you be undermining the existing foundations? will the existing foundation wall be deep enough for the increased crawl space depth? will you need to underpin the house prior to starting this excavation?
vacuum (sp) excavate it. water a nd vac truck. stir it up with water jet and suck it out. may have to hire it done. why do you need 4' of clearance?
to repair waterlines and gas lines and insulate the floor
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
coverplating existing columns huangyhg 产品功能分析 0 2009-09-08 02:16 PM
【转帖】rendering On Existing Mfc Device Conte yang686526 DirectDWG 0 2009-05-07 02:57 PM
【转帖】query regarding printing drawings 9dwg0 in model space yang686526 DirectDWG 0 2009-05-07 12:06 PM
【转帖】paper model space yang686526 DirectDWG 0 2009-05-06 09:37 PM
【转帖】how to transform a point in sketch space to assembly space yang686526 SolidWorks二次开发 0 2009-04-13 12:04 PM


所有的时间均为北京时间。 现在的时间是 12:44 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多