几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-08, 05:48 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 design of roadway using pavers

design of roadway using pavers
anyone who has a link of good refence to design access roads using pavers? please let me know.
check out our whitepaper library.
i can't provide a good reference, but i worked briefly for txdot in the mid 90's, and i helped supervise the construction of an intersecion of a residential road to a highway. if i recall correctly the road was layered from top to bottom as follows. pavers/1" sand/4" reinforced concrete/asphalt underlayment/lime treated soil. the pavers were locked in place with a concrete curb element around the perimeter. as far as i know, the intersection has held up well. i haven't been by in a few years. the nice thing about the pavers, is that if there is a local failure, pavers can be removed and replaced without too much trouble.
lufti - give me a few days - there is a grad student at the indian institute of technology in kharagpur who is doing a thesis on the subject. soon.
bigh,
cool and i would appreciate that. i am assuming it is like any other pavement; the base and sub-base material and compaction are the most critical.
thanks again bigh
compaction is critical, but also avoiding loss of the sand layer (think 2" normally recommended) is important. as jcox recommends for heavy duty use some kind of bound road base is good. he suggests asphalt or lime treated soil, i have previously used cement stabilised soil. i have also seen for light duty use a polythene sheeting between the subbase and the sand layer.
zambo
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
design build huangyhg 产品功能分析 0 2009-09-08 05:13 PM
contract issues - structural steel connection design in the huangyhg 产品功能分析 0 2009-09-08 01:40 PM
calculations personal tool or public record huangyhg 产品功能分析 0 2009-09-07 10:10 PM
anchor bolt design using aci 349 appendix b huangyhg 产品功能分析 0 2009-09-07 11:44 AM
【转帖】decimal dimensioningfractional equivalents yang686526 American standards 0 2009-04-29 07:28 PM


所有的时间均为北京时间。 现在的时间是 05:33 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多