几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-08, 04:59 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 deflection of sign structure

deflection of sign structure
i'm working on a sign structure which consists of a pole and a cantilevered arm (both hss round members), and i've confused myself with the deflection. the deflection of the pole is understood, but should deflection of the arm be considered? i would think the structure would deflect as a whole since it's freestanding, thus making the deflection of the pole critical and sizing the arm for strength not deflection.
most definitely.
depending on the size, the deflecton could be unsightly. for instance, a single-pole, full-flag billboard, with a face of 16' by 60' would look visibly distorted with only a couple of degrees of rotation of the cantilevered arm. if the arm is extended even further, the deflection could be considerably larger. i re
the signs are relatively small so the dead load deflection due to the signs is not significant. what i was wondering is should the deflection of the arm due to wind be considered? maybe i'm making this more complicated than it is, but my thoughts are that when the wind hits the sign, the pole and arm deflect together. the arm would not deflect very much on it's own without the pole beginning to rotate. therefore, a higher rotation can be tolerated on the arm than on the pole.
you probably already know this but....
make sure you check stresses due to torsion as well.
there are two different actions to be concerned about with a cantilevered sign under wind loading.
the first is lateral deflection of the vertical post, and the second is torsional rotation of the vertical post combined with lateral deflection of the cantilevered arm.
and also note that the center of the wind force is not at the center of the sign face in most building codes, it is usually located at 1/3 from the edge of the sign face.
don't forget the basics! just calculate the deflection using virtual work. two elements, about a five minute hand calculation, if that. no need to guess. if you are very uncomforable with this, use a computer program like staad.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
deflection of beam supporting a concrete slab huangyhg 产品功能分析 0 2009-09-08 04:57 PM
deflection design huangyhg 产品功能分析 0 2009-09-08 04:51 PM
buckling deflection calculation huangyhg 产品功能分析 0 2009-09-07 05:25 PM
brick cladding deflection limits huangyhg 产品功能分析 0 2009-09-07 04:48 PM
allowable beam deflection huangyhg 产品功能分析 0 2009-09-07 10:50 AM


所有的时间均为北京时间。 现在的时间是 06:22 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多