几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - How to get the current tolerance parameters of Tessellate curve?

		几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)\|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 仿射空间：CAX软件开发（三）二次开发与程序设计 » CAD二次开发 » SolidWorks二次开发
How to get the current tolerance parameters of Tessellate curve?

标记论坛为已读

搜索本主题

2007-05-20, 09:21 AM	#1
yogy 高级会员注册日期: 06-11 帖子: 1527 精华: 15 现金: 6353 标准币资产: 6353 标准币	How to get the current tolerance parameters of Tessellate curve? Q: Hi, I want to get the boundary of 3D model. In other words, I want to get the display or tessellation data of Curve in wireframe mode. How to get the current chordTolerance and lengthTolerance for curve objects? Your API is given below: vTessPnts = swCurve.GetTessPts ( chordTolerance, lengthTolerance, vStartPnt, vEndPnt ); yogy

GDT自动化论坛（仅游客可见）

2007-05-20, 09:22 AM	#2
yogy 高级会员注册日期: 06-11 帖子: 1527 精华: 15 现金: 6353 标准币资产: 6353 标准币	回复: How to get the current tolerance parameters of Tessellate curve? R: Dear, You should be able to find the chordTolerance from Tessellation::CurveChordTolerance. The length tolerance doesn't have a default value. The minium for both is .00000001. Regards, Robin Richter SolidWorks Technical Support

2007-05-20, 09:23 AM	#3
yogy 高级会员注册日期: 06-11 帖子: 1527 精华: 15 现金: 6353 标准币资产: 6353 标准币	回复: How to get the current tolerance parameters of Tessellate curve? R: Dear, The main controlling factor to determine the number of tessellated points is chordTolerance. So here is my suggestions on how to use function GetTessPts(): (1) Set lengthTolerance to be the same as chordTolerance. (2) The SW default value for chordTolerance is 0.0001m. (3) If the curve is long (say 100m etc.), 0.0001m may be too small as too many tessellated points will be generated. In this case, users have to come up with their own value of chordTolerance. On example is that they can set up a rough upper limit of the number of tessellated points needed: nPoints. Then get the full length of the curve: lLength. Given these two parameters, they can calculate a chordTolerance = (lLength/ nPoints) and pass this value into GetTessPts(). Regards, Robin Richter SolidWorks Technical Support

« 上一主题 | 下一主题 »

主题工具	搜索本主题
显示可打印版本发送本页给好友	搜索本主题: 高级搜索
显示模式
平板模式切换到混合模式切换到树形模式

发帖规则
您不可以发表新主题您不可以回复主题您不可以上传附件您不可以编辑您的帖子 vB 代码开启表情图标开启 [IMG]代码开启 HTML代码关闭

相似的主题
主题	主题发起者	论坛	回复	最后发表
How to set the tolerance parameters of Tessellate face?	yogy	SolidWorks二次开发	5	2007-05-20 09:10 AM
Draft International Standard Iso/dis 10303-108	huangyhg	ISO standards	2	2007-01-02 12:55 PM
What is the range of tolerance value for Modeler::SetToleranceValue?	directdwg	SolidWorks二次开发	0	2006-12-19 12:59 PM
How to set the tolerance parameters of Tessellate face?	huangyhg	SolidWorks二次开发	1	2006-12-11 12:43 PM
How to set the parameters of Tessellate face?	huangyhg	SolidWorks二次开发	0	2006-12-07 04:14 PM

所有的时间均为北京时间。现在的时间是 09:54 AM.

沪ICP备06057009号-2

更多