几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 仿射空间:CAX软件开发(三)二次开发与程序设计 » CAD二次开发 » SolidWorks二次开发
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-04-13, 10:56 AM   #1
yang686526
高级会员
 
注册日期: 06-11
帖子: 14579
精华: 1
现金: 224494 标准币
资产: 234494 标准币
yang686526 向着好的方向发展
默认 【转帖】flat pattern in a drawing not showing up

flat pattern in a drawing not showing up.
i've created a piece that i've inserted bends into and when i go to do my drawing in the view pallete the flat pattern is showing up as the top view not the piece in the flattened state. am i doing something wrong? any ideas would be greatly appreciated.
ok i just figured out why it was happening but don't understand how it was happening.
in part file in the feature manager design tree i had a grayed out part called "flat pattern". when i deleted this my flat pattern came up in my view palette for the drawing.
can anyone enlighten me as to the why and how this happened?? thanks.
why did you delete the "flat-pattern1" feature? sw uses that feature to create the derived config for the flat pattern.
after deleting the "flat-pattern1" feature, did you suppress the "process-bends1" feature? if so, that is why the views are screwed up.

cbl,
i looked through some of my previous parts and noticed that they didn't include this grayed out part so that's my reason for deleting it.
only after deleting this feature did my views show up correctly.
there is 2 ways to create a bent sheetmetal part.
1. create the base (bottom), then add edges to that. final model will be folded version
2. create the flat pattern then add bends to form the folded part. final model will again be folded
first way will give you 2 configurations in your part, flat pattern and folded.
second way will only give you the folded config in your part, until you go to create your drawing it will then create the other config for the flat pattern.
insert the view you wish make sure the config is set to that and off you go.
don't start suppressing and deleting features in your part as it could screw up the other config and give you frustrating rebuild errors.
personnally i prefer the first method, cause i get to think less, and that makes my pay seem like more.
i created an extrusion first, shelled it to create my thickness and then inserted bends. i've attached a screen shot of the part.
yang686526离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
【转帖】children of component pattern yang686526 SolidWorks二次开发 0 2009-04-13 09:43 AM
【转帖】can you modelize a drawing view yang686526 SolidWorks二次开发 0 2009-04-13 09:31 AM
【转帖】arget sheet drawing from excel yang686526 SolidWorks二次开发 0 2009-04-12 10:37 PM
【转帖】see what partassembly a drawing points to yang686526 SolidWorks二次开发 0 2009-04-12 10:19 PM
【转帖】how to save to dxf in active drawing file location yang686526 SolidWorks二次开发 0 2009-04-12 09:23 PM


所有的时间均为北京时间。 现在的时间是 02:04 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多