几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - Circular Runout, use of two Datum

		几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)\|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间：产品设计或CAX软件使用 » CMM检测 » PC-DMIS
Circular Runout, use of two Datum

标记论坛为已读

搜索本主题

2009-11-24, 10:55 AM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	Circular Runout, use of two Datum I would like to reproduce the example as in figure R2.GIF. Using the program 43_RUNOUT.PRG (1.GIF) I have tried to calculate the runout of the Circle CIR1 and the two cylinders. In any way I succeed in inserting the two DATUM as cylinders. Instead I succeed in calculating the runout with two DATUM, of which one is a plane (4.GIF). But in this case I can assign the primary DATUM to the plane and not to the cylinder (as in figure R1.GIF). Are there limitations in this type of calculation? > There are two datum reference frames in question: 1. For Plane and Cylinder, the Plane should be the primary datum and the cylinder should be the secondary datum. The primary plane will control orientation and the secondary cylinder will control the location of the datum axis. If you specify the datums in the reverse order, the primary cylinder datum will control both orientation and location of the datum axis, so no secondary datum can be used. For this reason, I believe the drawing has the datums in the wrong order. 2. Compound datum C-D. You can use a compound datum in PC-DMIS but you must type the datum combination C-D in the datum control since the pulldown list has only individual datum letters. With your program, the datum nominals are not exact since they are learned features (Measure features) and therefore PC-DMIS will not recognize these datums as coaxial. You must fix the NOM XYZ and IJK for the datums (as well as the considered feature) so they are exact. Then specifying C-D in PC-DMIS will work. Datums are assumed to be theoretically exact features so their NOMs (as well as the NOMs of the considered features) must be exact to get correct GD&T results. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

GDT自动化论坛（仅游客可见）

2009-11-24, 10:56 AM	#2
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	回复: Circular Runout, use of two Datum This is a good example for "Cutomized DRF" application. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

« 上一主题 | 下一主题 »

主题工具	搜索本主题
显示可打印版本发送本页给好友	搜索本主题: 高级搜索
显示模式
平板模式切换到混合模式切换到树形模式

发帖规则
您不可以发表新主题您不可以回复主题您不可以上传附件您不可以编辑您的帖子 vB 代码开启表情图标开启 [IMG]代码开启 HTML代码关闭

相似的主题
主题	主题发起者	论坛	回复	最后发表
ordinate dimensions to define gdt datum structure	huangyhg	tec-ease(America)	0	2009-09-05 11:59 AM
datum shif	huangyhg	tec-ease(America)	0	2009-09-04 05:45 PM
datum setup	huangyhg	tec-ease(America)	0	2009-09-04 05:45 PM
【转帖】asme - where to star	yang686526	American standards	0	2009-04-29 07:28 PM
【转帖】circular runou	yang686526	American standards	0	2009-04-29 06:55 PM

所有的时间均为北京时间。现在的时间是 08:36 PM.

沪ICP备06057009号-2

更多