几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-16, 06:44 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 w-shape beam to hss column moment connection

w-shape beam to hss column moment connection
does anyone have a reference for a w-shape beam to hss column moment connection? aisc said that they had one, but it is out of print now. it is included in the new steel manual but that's not availble until february, which is too far away. please advise. thanks.
i have a book from aisc calltes hollow structural sections connections manual. if it's out of print maybe you can get it on ebay.
i have had to use this kind of moment connection before. in the above book they do have a couple of ways of doing it. one of the ways, and the way that i used is to weld tee stubs to the tube column and then to bolt the stems to the beam flange. they also have end plate moment connections, and directly welded connections. i favored the tee stub because i thought it was more forgiving of column placement tollerances, but i'm sure that the end plate can work fine too.
try to get the above book, it goes through solved examples of various ways to connect wf beams to tube columns for a moment connection. maybe a local college has a copy in their library.
run the wide flange over the beam, put stiffener plates in your wide flange to align with the walls of the hss column below, field weld the tube to the bottom of the wide flange with whatever you need (full pen never hurts).
i agree with arneg, but you may be able to have a cap plate on the column with bolts to the bottom of the beam rather than a costly field weld
ever look at the descon connection programs.
some ideas there.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
urgent - concrete beam to column connection huangyhg 产品功能分析 0 2009-09-16 05:37 PM
hss beam to hss column shear connection huangyhg 产品功能分析 0 2009-09-09 06:01 PM
double cantilevered beam equations huangyhg 产品功能分析 0 2009-09-08 07:21 PM
concrete beam to column connection huangyhg 产品功能分析 0 2009-09-08 11:43 AM
cantilever steel beam at column huangyhg 产品功能分析 0 2009-09-07 10:40 PM


所有的时间均为北京时间。 现在的时间是 05:53 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多