几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-15, 08:37 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 seismic cat a exception

seismic cat a exception
just want to make sure i'm reading this right.
asce7-05 section 11.4.1 allows use of design category a for locations where s1 and ss are less than 0.04 and 0.15 respectively regardless of the site classification.
others have questioned the use of this exception for site classes other than b since that is what the spectral response accelerations figures are based on.
any thoughts are appreciated.
so pretty much florida? maybe so. maybe other things are driving the design much more.
i'd have to see the specific wording since i don't re
i always take advantage of this exception for such low seismic regions. it does not matter what the site class is for the project when the response spectral accelerations are so low.
checked it today...it does look like it's giving the okay for very low seismic areas like florida as long as you follow the other guidelines described later in that section for sdc a. essentially, wind is a much bigger force to deal with living in places like florida and things like liquefaction are addressed as geotechnical issues. more or less, if there's no seismic forces acting on the structure, then it should have a pretty good sdc...at least that's my interpretation.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
really basic, kinda stupid seismic question huangyhg 产品功能分析 0 2009-09-15 04:39 PM
ibc vs. aisc seismic - revisited huangyhg 产品功能分析 0 2009-09-09 06:57 PM
ibc 2000 - seismic-force-resisting system huangyhg 产品功能分析 0 2009-09-09 06:38 PM
flat plate and seismic design cat d huangyhg 产品功能分析 0 2009-09-09 12:21 PM
a concrete omrf in a high seismic risk area huangyhg 产品功能分析 0 2009-09-07 09:04 AM


所有的时间均为北京时间。 现在的时间是 06:21 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多