几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-15, 02:50 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 prison break

prison break
just curious if anyone caught the 2-hour pilot for the new fox channel series "prison break" last night? the main character is a structural engineer, who gets himself thrown into prison, so he can help his older brother on death row escape. of course, his brother is innocent, and was framed for the murder he was convicted for. supposedly, the engineer's former employer had done the "retrofit" of the older prison a few years before, and he had worked on part of the project.
there wasn't a whole lot about structural engineering on the show yet. the warden wanted him to help him work on a scale model of the taj mahal he is building as a gift for his wife. before he got thrown into prison, the engineer had some of the prison plans tatooed on his chest and back. (must not be planning on taking too many showers). he stole a machine screw out of some prison yard bleachers, which he somehow knew (as a structural engineer, no doubt), could be filed down and used as an allen wrench to remove a wall mounted toilet in his cell. overall, pretty lame stuff, but the and violence were pretty good.
i must admit that i'm glad someone finally found a way to make a structural engineer a main character, even though he's committing a crime if he really does succeed in getting his brother out. i'll probably be checking out the series, until it gets too improbable, or until he starts making friends with all the lawyer and architect inmates.
check out our whitepaper library.
"...the and violence were pretty good."
that's what structural engineering is all about.
i was a little disappointed. i was hoping for true-to-life scenes like:
"i purposely specified this wall to be styrofoam with a 0.25-inch concrete veneer, so we can dig through in about 5 minutes."

"i thought i’d specify the floor of this secret soundproof room to contain a trap door that leads to an unused, 1100 ft tunnel that nobody knows about, which opens up in a densely wooded area near an abandoned used clothing and make-up store, next to the large multi-modal transportation hub."
"of course i’m sure. there was a huge construction phase services budget that allowed me to be on-site every day of construction, so i can attest that it was all built exactly per plan."
"i’m the only one that knows that this wall is grossly under-designed to begin with, and i know for a fact the contractor didn’t use any rebar here."
on the other hand, i'm glad it captured the more mundane aspects of our careers, like portraying the "tough-guy" part of the personality that is so commonly found within the cubicle hallways of structural engineering departments. you know, the way we usually stare down the 300-lb muscle-bound inmate that wants us to be his "wife."
just your average day-to-day stuff...
"i'll probably be checking out the series, until it gets too improbable"
sounds like you're already past that point.
crossframe:
i was waiting for the scene where the se says:
"i was going to just have "mom" tatooed on my forearm, but i opted for the full set of plans from my last favorite prison job on my chest and back".
this thread is hilarous...but i've got to see this show for myself, too. sounds very odd to me.
so when the se had the plans tattoed on his back was it in reverse reading so when he looks in the mirror it will be correct reading. btw for safety reasons, the mirrors now days are polished stainless and firmly attached to the wall, they do not reflect as well as silvered glass.
i think he's in trouble.

again, as a point of authenticity, they correctly show how tattooing our plans on our bodies makes us look "hard" and helps with that elusive "design cred."

tim robbins played a strutural engineer (and militia-terrorist) in arlington road.
i wonder if he's licensed.
steve braune
tank industry consultants
no, but his name is "cool hand luke".
rmw
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
【转帖】want To Use Dd- yang686526 DirectDWG 0 2009-05-07 06:40 PM
【转帖】模拟南方软件下polyline线的输入(并进行修改),不敢独享 - 精华帖集合 yang686526 ObjectARX(VB.NET/C#) 0 2009-04-29 05:37 PM
【转帖】displaying the details of hard drives huangyhg vc编程 2 2008-05-03 01:47 PM
如何用用程序模拟键盘来控制 Media Player 7? huangyhg vc编程 9 2007-11-14 09:18 AM


所有的时间均为北京时间。 现在的时间是 12:50 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多