几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 07:12 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 impact loading of weight drop

impact loading of weight drop
to solve sudden drop of weight to the beam
i'm currently utilizing equation in sec 2.8-3 'design of welded structur' y blodgett.
f = wb + sqrt(wb^2+2*k*wb*h)
my problem is that actuall 'k' is too big so, i'm getting too big f
supporting strucure is too stiff (depth is 6' slab) also loading is not applied on the almost cornor of the slab causeing too small deflection under unit load
so, this results in very high stiffness
if we use the above equation and assume infinite stiffness, small drop (like 0.1") will cause infinite f !
it does not look make sense to me
this book is saying that 'as the weight of the supporting member (wm) increase, this impact factor of (2) becomes less'
do you have any solution or idea how that factor (2) can be decrease? i tried to derive the solution, but that was not succeessful.
my case is wb = 200k ,h = 0.51", and
k = 20,000 k/in (from fem model)
if i use the above equation dlf is more than 30!
it's too much to consider that drop of the weight.
do you know how to handle this proble ?

i think you need to step back and look at your assumptions. impact loadings are very difficult in practice, and there have been several threads on them in the past.
the reason you simplistically get infinite stresses from an infinite stiffness is that in effect you have assumed an infinite young's modulus, and since the beam has to absorb a certain amount of energy it must deflect. you haven't left it many options.
the worst equation in the whole world (possibly an exaggeration) is the one for 'deflections from a suddenly applied load', two times the force you first thought of. it is not actually wrong in context, but it is not conservative in many cases, and it is misleading.

cheers
greg locock
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
impact load factor huangyhg 产品功能分析 0 2009-09-09 07:11 PM
designing for impact loading huangyhg 产品功能分析 0 2009-09-08 06:14 PM
deisgn of steel hopper for impact loads huangyhg 产品功能分析 0 2009-09-08 05:05 PM
asce 7 - impact loading for bulkheads huangyhg 产品功能分析 0 2009-09-07 12:55 PM
do-160 static loading vs impact loading huangyhg 精密机械 0 2009-09-05 10:39 PM


所有的时间均为北京时间。 现在的时间是 08:52 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多