几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 12:40 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 floodwall w water on the landside

floodwall w/ water on the landside??
i will be working on a floodwall design in a couple of weeks. i am doing research and trying to get as much info. for the design criteria.
one case i am going to design the floodwall is when the water on the waterside is to maximum elevation. however, i am trying to figure out if it is more conservative to place the water on the landside at the land elevation (higher elevation) or at the footing elevation (lower elevation).
by placing the water on the landside at the land elevation there will be greater resistance force on the floodwall, but there is also going to be more uplift forces.
from your experience do you guys know if placing water on the front (landside, footing) of a floodwall/retaining wall more conservative if you place it at a higher or lower elevation?
do you guys know of any reference that discusses this?
thanks
for a given depth, forces are usually higher if you have saturated earth outside a pumped out cofferdam than if you have only water outside the same cofferdam. of course a lot depends on the soil properties. what your are descibing sounds like the same logic should apply.
as for references take a look at the l.b. foster website (sheet pile, etc. vendor) and request the "foster piling catalog" (a free cd with .pdf documents on it). here is a link to the page:
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
excessive bleed water in concrete huangyhg 产品功能分析 0 2009-09-09 08:49 AM
different types of water reducers huangyhg 产品功能分析 0 2009-09-08 06:45 PM
basement design - predicting water table level huangyhg 产品功能分析 0 2009-09-07 02:31 PM
aluminium ladder inside water tank - please help huangyhg 产品功能分析 0 2009-09-07 11:12 AM
5 story basement, 30 below water table huangyhg 产品功能分析 0 2009-09-07 08:50 AM


所有的时间均为北京时间。 现在的时间是 08:41 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多