几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-08, 01:07 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 conflict between stp foundation and existing leaching pools

conflict between stp foundation and existing leaching pools
hi everyone,
during the construction of sewage treatment plant building foundation, about 15 old leaching pools have been found during the excavation. the leaching pools bottom elevation is about 8 feet deeper than the bottom elevation of the tanks bottom slab. some of the leaching pools are in the middle of the foot print of the building and will e completely removed but four pools are near the edge of the foot print (about 4'away).
is it acceptable to remove the top section of the four pools and fill it up with compacted fill and do we need field test to verify the proper compaction below the bottom slab of the stp building.
thank you for your help.
before anyone goes on, can you please advise the nature of the soil taht you are wanting to found on? are you on till, or sand, or clay, or . . . what is the consistency or relative density of the soils you wish to found on.
the soil at the stp building location is sandy soil (for the top 25' with medium density and the foundation design was based on minimum bearing capacity of 3 tons per square foot.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
concrete foundation huangyhg 产品功能分析 0 2009-09-08 12:11 PM
capacity of rubble stone foundation to support concentrated huangyhg 产品功能分析 0 2009-09-07 10:52 PM
blasting bedrock next to existing structure huangyhg 产品功能分析 0 2009-09-07 03:55 PM


所有的时间均为北京时间。 现在的时间是 12:15 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多