几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-08, 09:43 AM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 coal vs. steel

coal vs. steel
i'm looking at a coal processing facility that is having some structural problems. the building column bases are surrounded by coal debris. will the coal breakdown the steel?..the steel is anywhere from 50 to 100 years old and is heavily coroded. the coal debris retains water so i'm sure that the water has alot to do with it. i was wondering if the coal itself was contributing to the section loss.
check out our whitepaper library.
depends on the coal. coal can have a lot of impurities, such as sulfer, which in the presence of water will attack the steel. if the debris is dust, it may just be the medium that retains water and blocks free ventilation enough to establish oxygen deficient corrosion cells that attack the steel.
blacksmith
if you identify the need of repair, you may -if so proves good solution- concrete around with special concrete and maybe sacrificial surfacing.
acid attack is feasible and will be effected through standing water. it may affect also to concrete and its reinforcement.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
carbon steel vs. 4130 alloy steel huangyhg 产品功能分析 0 2009-09-07 10:57 PM
bearing capacities of steel angles huangyhg 产品功能分析 0 2009-09-07 03:14 PM
astm steel grade to support basement wall huangyhg 产品功能分析 0 2009-09-07 01:47 PM
allowable steel stresses for monorails huangyhg 产品功能分析 0 2009-09-07 11:06 AM
【转帖】asme美国机械工程师标准目录2 huangyhg American standards 5 2009-04-26 02:38 PM


所有的时间均为北京时间。 现在的时间是 01:26 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多