几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-07, 08:39 AM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 300 ton top running crane

300 ton top running crane
need crane information, bridge wt., wheel load, number of wheels and spacing, hoist wt., etc. for a 32 span 300 ton top running crane.
anyone have anything, anything on web?
thanks much.
alcedo
check out our whitepaper library.
according to the whiting crane handbook, for 300 ton crane with the follwoing qualifiers:
1. span of 70 feet (nothing in the span range that you asking for)
2. has 50 to auxiliary crane
3. based on c class service
4. crane can be pendant or cab controlled.
the weight of the trolley 170,000 pounds
the weight of the crane is 390,000 pounds
wheel load 100,000 pounds without impact!!
the required rail is 175 pounds (this is pounds per yard!!!)
i have various dimensional facts that would be required for building clearances, etc.
this handbook is very valuable and it is out of print. give me you e-mail address and i will be happy to fax you the data sheet.
i hope this helps.
whiting is a good place to start for a very generic estimate of loads, but the best information will be from your crane manufacturer. if it is an existing crane, they will have all the data. for a new crane talk to some of the prospective bidders. trolley loads for new cranes are usually much lighter than those listed in whiting handbook.
rockengineer is absolutely correct and agree with his statement. i failed to mention about making the call to the crane manufactures.
keep in mind that 300-ton cranes are not built everyday. the largest crane that i ever worked on is a 500-ton crane with about 100-foot span with couple of auxiliaries.
regards
thanks to all, have located a whiting crane book. had no information in our engineering library on this so sort of in deep water. have done some 200 to 540 ton cranes over the years but has been a while. wish some manufacture would put this on line. kranco has some good material but does not publish it anymore, you have to call and ask a rep. so they can find where the crane is going for sales use.
started to e mail one of you guys but did not know how on this site to find the e mail address.
wishing all the best for the holidays.
alcedo
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
150 50 ton overhead crane structure huangyhg 产品功能分析 0 2009-09-06 10:34 PM
1 ton hoist calculation huangyhg 产品功能分析 0 2009-09-06 10:25 PM
【转帖】asmeb107.100-2002-b94.9-1999标准 huangyhg American standards 1 2009-09-01 09:28 AM
【转帖】asme美国机械工程师标准目录2 huangyhg American standards 5 2009-04-26 02:38 PM
【转帖】数据结构复习笔记 huangyhg vc编程 0 2009-03-22 10:46 PM


所有的时间均为北京时间。 现在的时间是 04:47 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多