yang686526

dwf-export: arcs displayed as straights
dwf-export: arcs displayed as straights
hello,
we have a problem with dwf-export.
in our drawings we have a lot of arcs with several radii and lenght. after dwf-export, sometimes we see straights (see second example), or destroyed arcs (see first example). the dimension of the example-drawing in m1:250 is 50 x 16 meters. in the first dwf we set xsize/ysize to 94/102, in the other to 9400/10200. but in these dwf, the arc on the right side is a straight! why?
we know, that 94/102 is to less! so the result in the fist dwf is comprehensible! but with 'better' resolutions the arc were gon!
what can we do?
we use version 2.6.3 (vc2003) and the exportdwf-function.
thank you very much!
attached files
can you attach the source dwg for these files?
vladimir
yes of course!
we use our own cad-format. because of this, the dwg-file is the result of our dwg-export with our oda converter. the dwf and the dwg were both arose out of the same oddbdatabase.
attached files (27.6 kb, 2 views)