几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » Norm Space: Product Automatic Standards - 范数空间:产品自动化标准 » National Standards » American standards
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-04-29, 07:36 PM   #1
yang686526
高级会员
 
注册日期: 06-11
帖子: 14579
精华: 1
现金: 224494 标准币
资产: 234494 标准币
yang686526 向着好的方向发展
默认 【转帖】do i double the resul

do i double the result?
the axis of one hole, which is the datum, to another hole.
the feature control frame says 0.1 to [-a-],[-b-],[-e-]. a 42.5 basic leads from diameter a-e to the perpendicular center axsis of the other hole.
for purposes of capability studies does the 0.1 mean the entire tolerance zone? and if that is the case should the delta between the true center and the datum be doubled.
joeblock,
no, delta does not double.
the datum hole is located exactly in its correct position, by definition. the second hole is located with respect to the datum hole. the 0.1 value is a diameter around the nominal position of the second hole.
by the way, the hole is the datum, not the axis. asme y14.5m-1994 does not allow you to apply datums to axes.
i hope that helps.
jhg
drawoh is correct, but in this case the datum axis is established by two datum features. asme y14.5-1994 states "a datum axis established by coaxial datum features is normally used as a primary datum." this is the only situation that i am aware of where a datum axis is used as a datum.
joeblock that is the whole point of positional tolerancing, everything comes from the datum, dimensions do not stack up.
one day all parts will be made this way.
sorry i'm late... ditto with the others
chris
sr. mechanical designer, cad
solidworks 05 sp3.1 / pdmworks 05
thank's everyone, but i want to make sure, what i should have said is do i double the result to represent 0.5 to each side of the tolerance zone on a layout report. just like a diametrical true position.
if you are refering to simply doubling you deviation from nominal to obtain your tp, it works just fine. with a diametrical zone, one doubles the root of (x squared + y squared). so if your y is 0, then you are doubling the root of x squared. the root of x squared = x, so in essence, you are doubling x.
you're doing a capability on a position? seems a little odd as that won't show if the position is deviated to the plus or minus of the basic dim.
in the study i would use +/- .05 not .1. i'm looking at it like a profile tolerence, the .1 describes the zone of .05 eather side of perfect to the datum.
yang686526离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
【转帖】模拟南方软件下polyline线的输入(并进行修改),不敢独享 - 精华帖集合 yang686526 ObjectARX(VB.NET/C#) 0 2009-04-29 05:37 PM
【转帖】在vba里由基本三角函数导出的三角函数 yang686526 数据库ObjectDBX 0 2009-04-28 12:25 PM
在vba里由基本三角函数导出的三角函数 yang686526 ObjectARX(AutoLISP) 0 2009-04-26 06:33 PM
【转帖】怎么判断对象是否被删除 yang686526 ObjectARX(VB.NET/C#) 0 2009-04-21 12:33 PM


所有的时间均为北京时间。 现在的时间是 06:20 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多