几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-16, 07:28 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 web stiffeners

web stiffeners
we have some steel where the fitted stiffeners are 5" away from where we'd like them (in a number of beams, the smallest being a w14). i have been looking through the code to find if there is a criteria for how close the stiffeners should be to the anticpated load.
the stiffeners are for web crippling, and not flange bending, so i was curious as to the allowable distance away. obviously the force distributes throughout the web, so i wasn't sure if there was a limitation on this.
thanks for your help!
rc
all that is necessary for the triumph of evil is that good men do nothing.
edmund burke

find a job or post a job opening
also, in most of chapter k, they refer to k1.3 thru k1.7 to be checked if compressive load....etc., if i have tension only, then i don't need to check these correct?
thanks!
rc
all that is necessary for the triumph of evil is that good men do nothing.
edmund burke

how long is the bearing length? is the stiffener on the bearing surfact at all?
some of the checks are for both tension and compression, and some are just for one of the two. each section spells out which ones apply.
the bearing surface is located 5" from the stiffeners.
they do not overlap at all.
again this is only for a tensile load. having a stiffener at less than 0.5d away from the load should still help using a 2:1 load distribution, right?
rc
all that is necessary for the triumph of evil is that good men do nothing.
edmund burke

k1.2 - local flange bending - tension
k1.3 - local web yielding - tension/compression
k1.4 - web crippling - compression
k1.5 - sidesway web buckling - compression
k1.6 - compression buckling of web - compression
k1.7 - doesn't really apply here.
so only k1.2 and k1.3 apply correct? i did miss k1.3 in my previous post.
what about having stiffeners at a distance away from the load?
thanks.

rc
all that is necessary for the triumph of evil is that good men do nothing.
edmund burke

when you say bearing surface, do you mean hanging surface? if web crippling is the problem, how is your load in tension?
if you are hanging a load from a plate welded to the flange, the stress will be maximum at the top of the fillet and will be spread over a distance something like n+5k. the stiffener will not participate if it is outside of that. also, for tension in the web, a stiffner will not help at all (and maybe even hurt) if it is not welded to the flange.
where are you getting the n+ 5k value?
rc
all that is necessary for the triumph of evil is that good men do nothing.
edmund burke

n+5k is the distribution length in the aisc code equations for web local yielding, for a load applied greater than d from the
right, n being the weld size and 5k for further than d from support and 2.5k for less than d. is that in each direction or a 1.25k in each direction?
rc
all that is necessary for the triumph of evil is that good men do nothing.
edmund burke
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
web crippling asd specs huangyhg 产品功能分析 0 2009-09-16 07:24 PM
ransverse stiffeners and diagonal stiffeners huangyhg 产品功能分析 0 2009-09-16 03:37 PM
orsional analysis of a beam with web stiffeners huangyhg 产品功能分析 0 2009-09-16 03:16 PM
beam web stiffeners huangyhg 产品功能分析 0 2009-09-07 03:11 PM
beam web buckling huangyhg 产品功能分析 0 2009-09-07 03:10 PM


所有的时间均为北京时间。 现在的时间是 03:48 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多