几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-16, 06:45 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 w18x50 v50 - what does the v50 represen

w18x50 <v50> - what does the <v50> represent?
the slab is composite so i'm leaning towards two rows of steel studs. but i've never seen this noted like this before. can anyone confirm this? what does the "v" represent? thank you.
check out our whitepaper library.
shear at the ends of 50kips?
grade 50 ksi steel. back in the 1980's 50 ksi yeild strength steel was coming into existance. it would be mixed with standard 36 ksi steel so the 50 ksi steel was identified by the v50 mark.
is there not a key to the symbols used on the drawings?
trust me it means 50 ksi steel.
what do the structural notes on the plans for the project say? in these notes, in the "structural steel" section - other than reinforcing steel - do they specify "grade 36 steel unless noted other wise on the plans"? if so, then this is obviously an exception to the grade 36 requirement.
if this is not an exception to the structural notes, then it could be a shear load for bolt requiremets at the beam ends as previously suggested. do all the beams have this or a similar notation?
mike mccann
mmc engineering
thank you for the responses.
the plans are dated 1992.
i only have two of the plans, one is the floor plan and the other is the notes, but there are no structural notes.
the majority of the beams has <50> but not all of them.
and there is a note of a composite deck but there's no indication of the number of studs for the beams.
is the notation v50 or just 50? v50 is steel grade.
don't go out on a liability limb for the clisnt here,, cya...
mike mccann
mmc engineering
if the plans have the name of an engineering firm, google them and ask.
even if, heaven forbid, they only have the name of an architectural firm, follow the lead and ask as previously suggested. they might have a record of who the structural was. hopefully, they are still in business. in light of the past four months, you'd better do your asking quickly...
mike mccann
mmc engineering
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭



所有的时间均为北京时间。 现在的时间是 12:15 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多