几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-10, 03:05 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 monolithic footing design

monolithic footing design
anyone knows a method to design a monolithic footing (wall footing)integrated to slab on grade for residential structural design.
thanks
adcfl
miami, fl

adc,
the monolithic footing, or turned down slab edge, is primarily a means of terminating the slab pour without have the masonry crew show up to lay two courses of block (in florida where we have no frost line). this type of foundation can typically support a one-story residential structure with no problem. for larger structures, and multi-story homes, the soil bearing under the monolithic footing should not exceed the allowable bearing pressure recommend by the soils report. in absence of a soils report in hand, a preliminary design based on an allowable soil bearing of 2,000 psf would be reasonable.
it is important to note the the wall or column load has to be taken by the contact area under the monolithic footing and cannot be distributed to the slab on grade.
if the residence is more than one story, you may want to consider a masonry stem wall on a strip footing.
john carter, tampa
the document i used to use in texas with expansive clays was:
"design of slab-on-ground foundations", august, 1981
prepared for: wire reinforcement institute, 7900 westpark drive, mclean, virginia 22101 and for the concrete reinforcing steel institute, 180 north lasalle street, chicago, illinois 60601.
the method was developed by a mr. walter l. snowden, pe in austin, texas. it is an empirical method. there may be an updated version out there somewhere. i would start with crsi.
i typically design the thickened edge as an eccentric footing (usually the load is eccentric) with no contribution from the slab or tapered area from the bottom of the footing to the slab. i agree with what john stated above.
thanks to everyone, i got pdf dcoument from wire reinforcement institute, it's interesting but the foundation design is like a grade beam and i'd like to get a footing design with a geometry like a thickened edge slab.
thanks to jhon really good explanation, i did a design with a software that a friend gave me but i want to know how to do the calculations.
thanks
adc
miami, florida
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
interrupted footing design huangyhg 产品功能分析 0 2009-09-09 09:18 PM
in a design and built contract,i ha huangyhg 产品功能分析 0 2009-09-09 07:16 PM
footing is too small for residential addition1 huangyhg 产品功能分析 0 2009-09-09 01:04 PM
design of continuous or strip footing huangyhg 产品功能分析 0 2009-09-08 05:37 PM
design build huangyhg 产品功能分析 0 2009-09-08 05:13 PM


所有的时间均为北京时间。 现在的时间是 05:53 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多