几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-10, 09:47 AM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 lateral resistance to eq

lateral resistance to eq
i have been reading a lot of codes lately and seem to recall something that i can't find again. i thought i read that i could not rely on soil friction for lateral resistance to a seismic event. i really don't want to have to use rock anchors.
i doubt my memory so maybe someone can definitively tell me i am wrong or right and alert me to where i might have found it. if i did in fact read it, i suspect it was either in ibc 2006 or 2003, asce7-05, or even aci 318-02.
thanks for your thoughts.
look at the pci design hand book 6th edition. the examples use soil friction to resist lateral forces. (these examples contradict your statement)
seismic base shear may be resisted by soil friction, passive pressure or combination thereof. geotechnical engineer may prohibit soil friction for certain site conditions including areas with liquefaction potential.
see table 1804.2 in the ibc. it implies that lateral sliding is possible with seismic loads (see the footnotes).
however, be sure, in your load combinations, to take into account the vertical component of seismic demand as this will reduce the friction amount.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
lateral resistance of cast in place concrete piers huangyhg 产品功能分析 0 2009-09-10 09:46 AM
lateral loads on pile groups huangyhg 产品功能分析 0 2009-09-10 09:45 AM
lateral load resistance of slab on metal deck huangyhg 产品功能分析 0 2009-09-10 09:42 AM
lateral bracing for long span beam huangyhg 产品功能分析 0 2009-09-10 09:36 AM
allowable lateral resistance of caltrans standard cidh piles huangyhg 产品功能分析 0 2009-09-07 10:59 AM


所有的时间均为北京时间。 现在的时间是 04:02 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多