几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 07:36 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 info for precastprestress plants

info for precast/prestress plants
hi guys,
i have recently designed some prestressed concrete beams and was looking for some information on how prestressed concrete units are actually made. i have organised a trip to a local facility but was wondering if anyone has some information on the process of making prestressed concrete beams.
its really simple, the tendons are streched between two end anchors, and then the concrete poured. forming is usually done on beds, so the only forms are the sides. usually after a overnite cure they are stripped out and set in the yard to cure.
the prestressed/precast concrete institute (pci) will have what you need at
jrisebo,
don't they need to wait for the concrete to achieve a design strength before they strands can be cut.
yes, usually its around 3500 if i re
steam curing is also often used to accelerate strength gain in precast elements.
very often you are not aware of the heat used for accelerated curing since it could be steam, hot water, hot oil or electric that is often built into the curing area floor or the molds.
the concrete mixes are highly proprietary for the local materials, products and curing. normally, a precaster will only use its own mixes since using something different could be in contflict with the pci certification program. the program is well established through the years and is used by the upper 85% of the industry. the certification is not just the mix design but is a very advanced and monitored quality program that puts the quality variations for poured concrete to shame by a large factor.
dick
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
【转帖】meaning of entity info shown odamfcapp gui spilitwindow yang686526 DirectDWG 0 2009-05-06 05:29 PM
【转帖】how to retrieve info for ole links yang686526 DirectDWG 0 2009-05-06 03:09 PM
【转帖】autocad 2007 - info please yang686526 DirectDWG 0 2009-05-04 04:26 PM
【转帖】qa info on drawings yang686526 American standards 0 2009-04-29 09:35 PM


所有的时间均为北京时间。 现在的时间是 10:27 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多