几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 06:59 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 ibc-06 aci 350-89

ibc-06 & aci 350-89
the 2006 ibc refers to aci 318-05. aci 318-05 refers to aci 350 in section r1.1.4, footnote 1.3. footnote 1.3, on page 409, states that aci 350-89 is the edition to be used, not the subsequent versions. is this an oversite. does anyone know if the 1989 version of the aci 350 is the version that should be used in accordance to ibc 2006.
find a job or post a job opening
from what i can tell, since the ibc does not reference aci 350 in chapter 35, then whatever 318-05 references would be the current standard. this is not unusual since codes are updated on different cycles.
there is a concept in the ibc, under alterative design methods, where you can use a future version of the code or referenced standard. the idea is, it will be adopted in the future anyway.
i have seen this used only when the future code relaxed a requirement (like a-2 occupancies in unlimited area buildings were not permitted in the 2003 ibc but permitted in the 2006 ibc). if the building official will not allow you use the future provision, you simply adjudicate it to the appeals board. i do not know a building or fire official that would not support a coming code provision not yet in effect.

don phillips
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
ibc 2107.2.3 vs. aci 530 2.1.8.6.1.1 masonry lap length cage huangyhg 产品功能分析 0 2009-09-09 06:46 PM
aci 350-06 required by ibc 06 huangyhg 产品功能分析 0 2009-09-07 09:50 AM
aci 318 appendix d huangyhg 产品功能分析 0 2009-09-07 09:42 AM
【转帖】哪位高手指点一下下边lisp的怎么用 yang686526 数据库ObjectDBX 0 2009-04-28 12:13 PM
哪位高手指点一下下边lisp的怎么用 yang686526 ObjectARX(AutoLISP) 0 2009-04-26 06:19 PM


所有的时间均为北京时间。 现在的时间是 09:50 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多