几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 06:59 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 ibc [international building code]

ibc [international building code]
i don't know where to put this.
in the ibc [and other building codes] there is a paragraph that directs the owner to procure a[n independant] testing and inspection agency when a structures that more complex that a residential dewlling is being build.
can anyone help me to locate that paragraph, please?
check out our whitepaper library.
section 1704.1 gives the requirement
have you checked out chapter 17? i believe what you are looking for can be found there.
it does not directly specify the owner secure special inspectors, simply that the special inspection plan be submitted at the time of permit, which typically requires special inspectors for certain work and those inspectors be independent. the owner, or agent, can secure these special inspectors. chapter 17 is the right place to start looking.
don phillips
you may be required to submit a statement of special inspection indicating who does what and when.
around here they are starting to require these statements because recently a reinforced masonry wall (which was missing its specified reinforcement) fell over during construction. a special inspector may have caught this oversight.
i'm fairly certain special inspections are required. some areas simply neglect to enforce the special inspections. if i'm not mistaken, it is state law in most placed (at least in ga)...but again, they are not fully enforced. i would make sure to look in '06 ibc as there are substantial differences. i predict that if you're not familiar with them be now, you will should be since i believe much more stringent enforcement will arrive between yesterday and a few years from now depending on your location. special inspections can only help to low everyone's liability. besides, you'd be absolutely astounded at what gets covered up when no one is checking.
you are right that special inspections is not widely and uniformly enforced, except larger and more complicated structures. when i was a building official and plans examiner, i would request a statement of special inspectors for new buildings (except conventional light frame)and invariably get a call from the architect/engineer asking what i wanted. if the structural engineer of record is concerned about certain aspects of the project, i would expect those concerns be addressed in the statement.
don phillips
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
ibc wind load on a square building huangyhg 产品功能分析 0 2009-09-09 06:58 PM
ibc wind exposure c definition - florida building code huangyhg 产品功能分析 0 2009-09-09 06:57 PM
ibc seismic question 9again0 huangyhg 产品功能分析 0 2009-09-09 06:53 PM
glazing in non-windbourne debris areas huangyhg 产品功能分析 0 2009-09-09 02:42 PM
base shear calculation fron ibc and asce-7 huangyhg 产品功能分析 0 2009-09-07 02:29 PM


所有的时间均为北京时间。 现在的时间是 02:20 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多