几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 01:38 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 foundation wall at overhead doors

foundation wall at overhead doors
this is a survey. do you normally provide a foundation wall at overhead doors, or maybe just thickened slab? this is for a 24' wide door into garage of multi-story condo. exterior pavement has steep slope down into garage, and will likely have trench drain there. building is supported on deep foundations.
go below frost depth for any part of the bldg you wish to stay at original grade.
if you can find a way to prevent frost from forming under the thickened slab, you could go that route. you would need to heat the garage, insulate the outside edge of the thickened slab, and extend the insulation horizontally below the driveway pavement.
daveatkins
i agree w/ both above
i agree with the above statements as well...
when designing in canada i typically used foudation wall if the rest of the structure was supported by foundation walls. i used sm load bearing insulation under (and extending out beyond) thickened slab if it was a structure with an unheated garage and slab on grade.
in new zealand i always use slab thickening. we don't get frost heave here in canterbury, or anywhere i know of in the country. possible exception would be for the very bottom of the south island (where i have not yet done any design work).
good luck,
ys
b.eng (carleton)
working in new zealand, thinking of my snow covered home...
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
foundation wall 40 feet below grade huangyhg 产品功能分析 0 2009-09-09 01:38 PM
existing masonry wall and sliding foundation huangyhg 产品功能分析 0 2009-09-09 08:55 AM
crack in foundation wall huangyhg 产品功能分析 0 2009-09-08 02:20 PM
concrete basement wall design huangyhg 产品功能分析 0 2009-09-08 11:39 AM
buttress wall relative rigidity huangyhg 产品功能分析 0 2009-09-07 05:57 PM


所有的时间均为北京时间。 现在的时间是 05:29 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多