几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 09:02 AM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 existing wood trusses

existing wood trusses
i'm working on a re-roofing project in fl with 30 yr old parallel chord trusses. the roof is flat and has been leaking for years. i viewed some of the trusses exposed to moisture but could not see any real damage to the wood or plates. i doubt i can find the original truss mfr. so how would i evaluate the existing conditions and make repair or refurbish recommendations?
tia
check out our whitepaper library.
first, it's a matter of determining if there is any 'dry-rot' (ie brown rot). this can be done by checking for any soft areas and/or having a mitochondrial specialist examining the area. if there is dry-rot you may have serious problems and it may be more economical to re-do the roof framing.
if no dry-rot, then if the plates haven't worked out; sometimes, they work their way out then the trusses are likely good for their original design load. this may have changed and acceptance of the old loading may be up to the authority having jurisdiction.
dik
assume that all members are sound (i.e. no rot). then either analyze the truss by hand or create a computer model to determine the forces in the members. if they work, great and if not, determine what needs to be replaced to make it work.
i recently had a similar project except that on one end of the building part of the roof collapsed. the entire roof had been leaking for some time. obviously we replaced the collapsed portion and the owner wanted us to examine the remaining roof trusses. be thorough, at first glance the rest of the trusses appeared to be fine. the contractor then took a hammer (claw end) hit one of the trusses that had already partially failed and it was apparent the wood was in bad shape. he then went on to point out that the trusses that looked fine, upon closer inspection had hairline cracks. then i looked at a chord
the trusses should have some sort of designation on them to indicate the manufacturer. with a little luck, you may find the original company that designed the trusses.
jechols,
what part of the county did this take place?
i have heard of very similar occurences to what jechols has reported, and know of a progressive collapse of a late 19th century truss system in kingston, ontario in which one failed truss brought most of the structure down like a stack of cards.
i would be curious where this was as well jechols; was it indeed in the states as it seems str presumes?
regards,
ys
b.eng (carleton)
working in new zealand, thinking of my snow covered home...
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
existing wood trusses are failing huangyhg 产品功能分析 0 2009-09-09 09:01 AM
diaphragm chord in deep bottom bearing wood trusses huangyhg 产品功能分析 0 2009-09-08 06:37 PM
coverplating existing columns huangyhg 产品功能分析 0 2009-09-08 02:16 PM
brick cladded wood studs huangyhg 产品功能分析 0 2009-09-07 04:47 PM
bottom chord bracing for cold form trusses huangyhg 产品功能分析 0 2009-09-07 04:28 PM


所有的时间均为北京时间。 现在的时间是 11:16 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多