几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-08, 12:45 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 concrete slab

concrete slab
by the fact that the slab is still there after 50 years will tell us that the slab is reinforced. concrete just doesnt span such distances without reinforcement.
however, do not remove two inches from the top without consultation with a structural engineer, it will most likely fail.
i'm in the uk so obviously i can't recommend a local professional but i'm sure someone will help you out.
agree with ajuk - get yourself a structural engineer and he/she can evaluate the slab. you can remove some concrete from the bottom surface of the slab to reveal the reinforcing bars and get a handle on what it was designed for and what condition the reinforcing is in.
hi, i am in tanzania.knockout a 1'x1'hole in the slab and find the rebar location/spacing.you can always make good later.
i'm sure a structural eng.can make a good guesstimate of the structural stability from the exposed section.
dont worry make a hole just 9"x9" and find out the location of reinforcement
okay and tell me the result
i should like to know how your contractor will remove 2 inches from a 12 inch suspended slab without damaging the integrity of the slab and probably causing collapse!!!
what will it cost???
if you must retain the existing patio level and need 2 inches of new surfacing, it may be less expensive to demolish the slab and rebuild.
have you considered 8mm, fired clay or ceramic tiles set in a thin epoxy mortar bed? these should not add greatly to the loading on the roof though it would be advisable to test load the roof and check the deflections to see if it is overloaded by any new work.
good luck
there are electronic detectors available which would find the rebar and give a fairly reliable idea of the size. it may be better than cutting a hole.
i think you should seriously consider jeg's suggested demolition option. replacing the existing deck with a steel ribbed pan deck is a possibility too.
i hope its ok to recommend ae firms here. if you still feel you need a local consultant, you could try smislova kehnemui assocs. in rockville. i have had good experiences with them.
you could shore the slab and then remove the 2 inches, but i dont think putting flagstone back there will restore your compression block.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
concrete roof slab load huangyhg 产品功能分析 0 2009-09-08 12:34 PM
concrete mix= reinfocing for exterior composit deck huangyhg 产品功能分析 0 2009-09-08 12:19 PM
chapter 4 preliminary design properties of concrete huangyhg 产品功能分析 0 2009-09-07 11:23 PM
as3600 concrete strength for slab on ground huangyhg 产品功能分析 0 2009-09-07 12:53 PM
analysis of concrete slab huangyhg 产品功能分析 0 2009-09-07 11:35 AM


所有的时间均为北京时间。 现在的时间是 01:57 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多