几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-07, 04:32 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 boundary nailing for unblocked floor diaphragm

boundary nailing for unblocked floor diaphragm
i'm designing a basement with an adjacent garage so that the wall is completely backfilled and also has a potential wheel load as a surcharge on the basement wall.
my calculations show that the reaction at the top of the wall is 550 lbs horizontal. i've looked through my nds books and all the values i find for blocked or unblocked diaphragms are for wind and seismic loads.
does anyone know where i can find tables or values for blocked/unblocked diaphragms that are for dead loads. or is there a method i am missing for just calculating the shear capacity of the nails and sheathing. the floor is using engineered lumber (i-joists) but i don't think that will have an affect on the diaphragm loads.
i'm assuming that the published values for wind and seismic have been increased by the load duration factors. do i just divide the published values by the duration factors?
any input would be greatly appreciated. if i can't get big enough diaphragm values then i guess i'll have to design
a beam in the top portion of the wall to resolve the horizontal loads.
thanks in advance for everyone's help.
i may be mistaken, but i don't think the values for diaphragms can be calculated by a rational method. i believe they are based on testing.
try looking in ibc, i haven't looked at it in a while, but i don't re
apa report #138 ("plywood diaphragms") has a note on page 2 saying that tabulated shears (for wind and seismic loading) can be reduced 25% for "normal" loading. the chart this note refers to provides allowables for blocked diaphragms.
the copy i have is dated 2000 and is based on the older 97 nds.
check with the apa to see if they have a newer version,
i just had another idea. all the tables refer to roof and wall diaphragms. the thicknesses of the sheathing only go up to 19/32.
my situation is for a floor diaphragm using 23/32 sheathing. has anyone seen a table or report that covers floor diaphragms w/ 23/32 sheathing?
2meterman,
the published values should be reduced by 25%. in other words, if the tabulated value is 400 plf, you would use 300 plf, then, if you decide to classify the load as permanent, cd=0.9 and now your value is down to 270 plf.
also, look at your bolts from the wall to your sill plate. i believe i already had a thread on this.
can you tie the top of your wall into the garage slab, and carry the tensile forces across to the opposing garage wall? if you do this, you'll need to you the "at rest" pressure of 60psf equivalent fluid weight for your wall design.
two ideas that don't directly answer your original question, but may help:
can you dowel the garage slab into the walls or pour it over the wall?
can you devise a detail in which the floor joists drag strut the wall load into the floor diaphragm?
btw, where is the load going once it is in the adjacent floor diaphragm?
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
reultant condition boundary huangyhg tec-ease(America) 0 2009-09-05 12:38 PM
【转帖】oddbspatialfilterboundary yang686526 DirectDWG 0 2009-05-06 08:12 PM
【转帖】can not set clip boundary type of wipe out objec yang686526 DirectDWG 0 2009-05-04 05:23 PM
【转帖】questions about general axis boundary concepts yang686526 American standards 0 2009-04-29 09:38 PM
【转帖】c#.net关于用-boundary命令填充用程序实现的问题,已找到方法 yang686526 ObjectARX(VB.NET/C#) 0 2009-04-20 09:50 AM


所有的时间均为北京时间。 现在的时间是 06:14 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多