几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-07, 12:28 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 api 5l x42 pipe

api 5l x42 pipe
i am about to spec an arch bridge which uses circular pipe for the arch (16" dia) and tie (11.75" dia). i have been told that it will probably be api 5l pipe. i assume this is differnet from the astm specs quoted in the aisc hss steel design manual.
how is the api 5l formed? although the aisc hss manual does not list api 5l in it's approved materials, if i am careful to use the correct values for fy, e, and fu, can i still use their design specs?
the specified minimum yield stress for api 5l grade x42 pipe is 42,000 psi. the max allowable stress is percular to the code that you are using.
e is 29.5 e+06 psi at 70 f.
using a wall thickness of 2.125" may require pre-heating and post heat (stress releaving) of butt weld joints.
manufacturing types of api 5l pipe can be seamless or have erw (not recommended) or dsa welded longitudinal joints which may require derating the allowable stresses.
11.75" is not a normal pipe size- are you sure this is correct?
i would expect to see a53-b or a500-b for an application like that, although a lot of different materials could be used.
and where did 2.125" thickness come from?
you may also want to check how the different codes handle tolerances on wall thickness.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
60 ft span ironsteel pipe with 3 - 20 ft sections huangyhg 产品功能分析 0 2009-09-07 08:54 AM
【转帖】pipe routing yang686526 SolidWorks二次开发 0 2009-04-13 01:28 PM
【转帖】api hooks for new bom reorganization functionality yang686526 SolidWorks二次开发 0 2009-04-12 11:04 PM
【转帖】外挂开发中的封包技术 huangyhg vc编程 0 2007-12-03 04:41 PM
【转帖】对于hook函数的一点认识 huangyhg vc编程 0 2007-03-27 11:53 AM


所有的时间均为北京时间。 现在的时间是 07:33 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多